Originally Posted by
Firefly
The way I've understood all this I would use a bit different wording:
1...not used
2...fuel addition during acceleration
3...fuel addition during max throttle
4...fuel addition to when cruising (steady throttle)
5...fuel addition timing speed for acceleration (how sensitive/quickly it determines you are accelerating)
6...fuel addition timing speed for max throttle (how sensitive/quickly it determines you are on full throttle)
For 5 & 6 the LOWER the number, the more sensitive it is-- as in it will detect your change from cruising to acceleration or full throttle quicker.
The problem many of us have run into is having 5 & 6 set to the same setting. The system gets confused and doesn't know if you are just accelerating or are on full throttle -- so it has a temporary glitch where it shuts off ALL signals and the engine stalls momentarily :yikes:. Not a fun experience when you're passing someone! The only 'cure' when this happens is to let off the throttle a bit and the engine will kick back in.
JB should have a disclaimer on this situation, or fix it so it won't do this.nojoke
At first the programming is a bit awkward, but you get used to it. Rather than use the 'color scheme' - I just count modes from 1,2,3,etc...... and you have to be kinda quick when doing it.