How do I pull fault codes on 2020 RTL?

I’ve looked here (although the site is running way slow lately and hard to search), on YouTube, the owners manual, and the web and cannot find how to get active codes on my 2020 Spyder RTL. I had the brake recall completed this past Saturday at my dealership and now I’m getting a brake failure message. I wanted to pull the codes to see specifically where the problem lies.

Push joystick in then down to settings then down to Fault codes. You'll find more info in the owners manual and YouTube.

Quote:

---

Originally Posted by Chiefburg

I’ve looked here (although the site is running way slow lately and hard to search), on YouTube, the owners manual, and the web and cannot find how to get active codes on my 2020 Spyder RTL. I had the brake recall completed this past Saturday at my dealership and now I’m getting a brake failure message. I wanted to pull the codes to see specifically where the problem lies.

---

Pages 31-36 of your owners manual (Large Panoramic Display), shows how to get to the settings menu and any current error codes, Chiefburg.

Pete

Thanks…for some reason I was looking for a troubleshooting section or an error code section in the glossary….couldn’t find it. But I know now….

Hello Pete,
I was excited to see your description of how to find error codes; however, when viewed pp 31-36 in my 2014 Owner's Manual, I didn't see anything about finding error codes. You may be able to point me toward how to find those codes - OR - someone else in the community may be able to point me toward how to find those codes on my 2014 Spyder RTL.
Regards, Patrick

Quote:

---

Originally Posted by PatrickH

Hello Pete,
I was excited to see your description of how to find error codes; however, when viewed pp 31-36 in my 2014 Owner's Manual, I didn't see anything about finding error codes. You may be able to point me toward how to find those codes - OR - someone else in the community may be able to point me toward how to find those codes on my 2014 Spyder RTL.
Regards, Patrick

---

Hi Patrick……yes, this thread was for ‘20+ RT, which is why you won’t see anything in your 2014 RT manual.

Here’s a video very kindly supplied by The Great Man himself (Lamont), on how to pull up your error codes. Bear in mind that you have to do this step before you turn your RT off, as that often resets the code (although it will pop up again). Hope this helps.

https://www.lamonstergarage.com/calling-up-fault-codes/

Pete

Thank you Pete. I appreciate the link (and the promptness of your response). Regards, Patrick