After F3T Floorboards that won't break the bank?

Printable View

03-11-2023, 08:27 PM
Fromridgewood

After F3T Floorboards that won't break the bank?

Hi Everyone.
I am a new member, I just bought a 2022 Spyder F3T
I need floorboards but they are way too costly.
Does anyone know where I can get a set without digging into
my grandchildren's college fund? Used floorboards will be ok.
My budget is $2-350. Thanks Everyone
Fromridgewood
03-11-2023, 10:32 PM
delkhouri

They are a bit over your budget at 369 but the lamonster black diamond floorboards are nice… i have a set on my ryker and have been pleased
03-12-2023, 01:49 PM
Haze

2 Attachment(s)

I have a pair of OEM footboards. Only used for 1070 miles before I switched to Ultimate boards
.
$50 + shipping. All you need is the mounting bolts.
PM me for details
03-12-2023, 02:27 PM
Boilermaker

Quote:

Originally Posted by Haze

I have a pair of OEM footboards. Only used for 1070 miles before I switched to Ultimate boards
.
$50 + shipping. All you need is the mounting bolts.
PM me for details

Sounds like a heck of a deal! Hopefully to OP will respond.
03-12-2023, 03:19 PM
Peteoz

Quote:

Originally Posted by Haze

I have a pair of OEM footboards. Only used for 1070 miles before I switched to Ultimate boards
.
$50 + shipping. All you need is the mounting bolts.
PM me for details

Haze, I’m not saying this as a deal breaker as that’s a great price for boards, but aren’t the clamps for the pegs different to the clamps for the boards on the F3? I have a recollection that there was a difference, but I could be completely wrong. I just don’t want to see you or the OP disappointed.

Pete
03-13-2023, 08:13 AM
blacklightning

Quote:

Originally Posted by Peteoz

Haze, I’m not saying this as a deal breaker as that’s a great price for boards, but aren’t the clamps for the pegs different to the clamps for the boards on the F3? I have a recollection that there was a difference, but I could be completely wrong. I just don’t want to see you or the OP disappointed.

Pete

:agree:Those are nice boards. But it is not a direct replacement as shown for the stock peg locations. I picked up a piece of 1/4" aluminum and made my own. Cut them out to be a fit and bolted them directly to where the rubber was on the pegs. After fitting them I coated them with rubber bed liner material. Worked great until I came across a set if OEM floorboards.
03-13-2023, 08:15 AM
narygancy

I agree with Peteoz, I'm pretty sure there's a difference in the mounts for boards and pegs, make sure whatever you buy will fit your F3. BTW, that's a very good price for boards Haze.

I bit the bullet and went with the Ultimate Floorboards and am very happy with them.
03-13-2023, 01:03 PM
Haze

Thank you to everyone for the words of caution for the purchaser.
I'm including the caution in my reply to potential buyers.
03-13-2023, 02:58 PM
Fromridgewood

Thank you Everyone for your guidance on my floorboard inquiry. I'm not sure that I will be able to mount the used pair shown by Haze, so unless something else pops up I will probably bite the bullet also and go with Lamonster or Ultimate.

Regards and thanks for the fast response.

Fromridgewood
03-14-2023, 11:10 AM
IGETAROUND

Quote:

Originally Posted by Fromridgewood

Thank you Everyone for your guidance on my floorboard inquiry. I'm not sure that I will be able to mount the used pair shown by Haze, so unless something else pops up I will probably bite the bullet also and go with Lamonster or Ultimate.

Regards and thanks for the fast response.

Fromridgewood

Might want to give Spyder Accessories out of Canada a look. I have his boards on my F3-T and love them, though they are pricey.

Al in Kazoo