Gauge pod

[MOSESS]

Ill be swapping out the temp gauge soon to install a volt meter on the right side. I know the I have to disconnect the fuel gauge. is there a dummy cover or some other useful gauge to install there. ready to roll on some of my winter mods thanks.

[IdahoMtnSpyder]

Ill be swapping out the temp gauge soon to install a volt meter on the right side. I know the I have to disconnect the fuel gauge. is there a dummy cover or some other useful gauge to install there. ready to roll on some of my winter mods thanks.
What you want is part #705003421, Gauge Cap. That is the blank used on the RT base model. You don't say you have an RTS or RTL but I'm guessing that is what you have, right?

[Cruzr Joe]

you can find them on line, look for a 22mm blank


Thats for your starter gun john ................ he needs a 52 MM blank. :roflblack:


https://www.rallysportdirect.com/part/pods/prs-ps-52blnk-prosport-gauge-blank-black-52mm?gclid=Cj0KEQiAguXBBRCE_pbQ5reuq8MBEiQANji2Lec MP8BnZSAe6Drbw2L78B7gebLUddJFRVVSA9onwuEaAnwJ8P8HA Q

Cruzr Joe

[cuznjohn]

Thats for your starter gun john ................ he needs a 52 MM blank. :roflblack:


https://www.rallysportdirect.com/part/pods/prs-ps-52blnk-prosport-gauge-blank-black-52mm?gclid=Cj0KEQiAguXBBRCE_pbQ5reuq8MBEiQANji2Lec MP8BnZSAe6Drbw2L78B7gebLUddJFRVVSA9onwuEaAnwJ8P8HA Q

Cruzr Joe

WOW my mistake, sorry and thanks for correcting me joe i appreciate it

[MOSESS]

I have a 15 RT-S. I am looking to fill the hole with a blank or another functioning gauge of some type. If I where to install a clock on the left where would I get continuous power. what have some of you put in that space.

[Trbayth]

USB charging ports maybe?

[NM Wrench]

I installed a volt meter

Sent from my VS990 using Tapatalk

[Chupaca]

There are many guages you can place there but it you are not interested in a guage the usb/charging port is the best...jmo..:thumbup:

[Cruzr Joe]

I have a 15 RT-S. I am looking to fill the hole with a blank or another functioning gauge of some type. If I where to install a clock on the left where would I get continuous power. what have some of you put in that space.



a clock would be a constant drain on the battery.

Cruzr Joe

[GOZFST]

a clock would be a constant drain on the battery.

Cruzr Joe
Isn't the current useless clock a constant drain on the battery now?

[Cruzr Joe]

Isn't the current useless clock a constant drain on the battery now?


good point, now you can have two constant drains on the battery.

Cruzr Joe

[MOSESS]

I have two USB ports in the center of the handle bars , I have the volt meter ready to go just want some thing else to fill the void but some thing useful. I know i mentioned a clock and that would be a drain. I could mount a small nav but I am afraid that it would grow legs and walk away when I am not around, Keep the ideas coming guys as I am at a lost on what to put there. thanks

[hschuchman]

What is the best volt meter to get for the guage replacement?

[MOSESS]

I don't know if there is a best . the unit I got was 25,00 bucks on Ebay. I saw some as high as 80.00, I thought that was a bit over the top so 25.00 was best for me..

[stevedfive]

I found this one on eBay. It's a Intellitronix. I have had it for 6 years.

[MOSESS]

I got the volt meter and I found a battery powered watch that is back lit , Its on ebay 23,00 bucks...