View Full Version : Maggie Valley.
Just pulled into Maggie Valley for the Rally and the orange screen of death came on. Any suggestions?
Highwayman2013
10-05-2016, 03:45 PM
What's the code?
Highwayman2013
10-05-2016, 03:53 PM
http://uploads.tapatalk-cdn.com/20161005/5a6f46917c14bbebb877ce7b075c8a90.png
Deanna777
10-05-2016, 04:12 PM
Just pulled into Maggie Valley for the Rally and the orange screen of death came on. Any suggestions?Take it to a dealership. It is under warranty. Did you get 138526? Try *** Turn key off/on immediately 4 to 5 cycles DO NOT LET THE SYSTEM SHUT DOWN.
What year is your spyder?
What spyder model?
Good luck! Keep us posted!
Deanna
2014 RTS. Spyder has not gone into limp mode. Everything seems to be working normally. I didn't know how to get the code until highway just posted. Will check first thing in the morning. Never had a problem in two years. Thanks
Sent from my SM-N930P using Tapatalk
Deanna777
10-05-2016, 05:46 PM
2014 RTS. Spyder has not gone into limp mode. Everything seems to be working normally. I didn't know how to get the code until highway just posted. Will check first thing in the morning. Never had a problem in two years. Thanks
Sent from my SM-N930P using TapatalkKeep us posted! Deanna
I ckecked for an error code this and got PO32A. From what I can find out it is the knock sensor. Can I run the bike with that code. Seems to be running good.
Bob Denman
10-06-2016, 08:03 AM
You should be okay: just make sure that you're feeding the bike fuel that's got the correct octane level...
Big thanks to Columbia Lazer Alignment for not only doing mt alignment, but also resetting the code error on mt Spyder. All seems well.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.