Recomendataions for bike cover for F3-T with F4 windshield

[jcthorne]

Anyone have a cover for thier F3-T or F3-L that also runs a F4 windshield?

I can tell you the one for Louise previous RT does not fit, since the windshield is wider, the pocket will not slide down the windshield.

Also any recommendations for the F3-S with F4 windshield? I have an Ultraguard RS/ST cover that sort of works but does not fit all that well.

[cnl414]

We are using the Nelson Rigg CAS 375 half cover and it works well. https://www.amazon.com/gp/product/B0068ESUJ0

Neal & Charlotte

[Chupaca]

:agree: Nelson riggs in many covers has a extension for larger windshields. Though mine is an RS I did put a larger flip shield. Sadly they do not compensate for the extended mirrors but thats a different issue...:thumbup:

[Peteoz]

We are using the Nelson Rigg CAS 375 half cover and it works well. https://www.amazon.com/gp/product/B0068ESUJ0

Thanks Charlotte.....that looks like a pretty close fit for the F3-T with an F4 screen and the big BRP passenger backrest. I'll give it a go.
Pete

[Peteoz]

Anyone have a cover for thier F3-T or F3-L that also runs a F4 windshield?

I can tell you the one for Louise previous RT does not fit, since the windshield is wider, the pocket will not slide down the windshield.


Thanks JC. I was just about to buy an RT cover as it looked about the right size for an F3-L with F4 screen. You have saved me some money !:thumbup:

Pete

[youngers]

hey fellow spyder guys and gals ! I just purchased a full cover for 2012 r-t it runs around 60.oo or so from amazon , it fits very well ! it is a FULL cover , over front wheels and rear area trunk all way too the rear tire! when I bought mine it had the nelson could not figure out that dang thing , I turned it 360 different ways it seems wayyyy too tight , so I use it too cover the 2 wheeler :opps:

[jcthorne]

I've tried the Nelson Rigg full cover and it does NOT fit the F3-T with F4 windshield. The windshield pocket is not wide enough.

[al0vely]

I have the stock windshield that came on my F3L and the Ultra Guard cover which works well for me. Not sure how well it will work with other windshields.

https://www.amazon.com/gp/product/B01BM6BDN8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

[Peteoz]

Looks like F4 might have to include a new line of product........travel covers for their extra wide screens.....

[Peteoz]

I've tried the Nelson Rigg full cover and it does NOT fit the F3-T with F4 windshield. The windshield pocket is not wide enough.

Thanks JC.....saved me wasting money AGAIN ! :thumbup:

[cnl414]

Thanks JC.....saved me wasting money AGAIN ! :thumbup:

I think JC is talking about the full cover. The Nelson Riggs that we are using on my husbands F3L with F4 25" windshield fits well and is a half cover.

Good luck with your search.
Charlotte

[F4 Customs]

Looks like F4 might have to include a new line of product........travel covers for their extra wide screens.....Sounds like a plan. I will contact a few folks that we know and see what can be done.Don

[Peteoz]

I think JC is talking about the full cover. The Nelson Riggs that we are using on my husbands F3L with F4 25" windshield fits well and is a half cover.

Good luck with your search.
Charlotte

ahhhhh. Thanks Charlotte. I need one for an upcoming trip, so I'll get the NR half cover and wait to see if Don is able to produce one longer term.

[jcthorne]

Sounds like a plan. I will contact a few folks that we know and see what can be done.Don


Great! Please keep us posted.

[Peteoz]

Just confirming that the cover mentioned by Charlotte below definitely works (and fits snugly) on an F3-L with 25" F4 screen and large adjustable BRP passenger backrest. The backrest also eliminates any chance of snapping the antennae under the cover.


We are using the Nelson Rigg CAS 375 half cover and it works well. https://www.amazon.com/gp/product/B0068ESUJ0

Neal & Charlotte