2012 RT Hub Not in Stock till Jan 2017

[Sarge707]

Screwed up my hub and driveshaft by trying to bang them out? Ouch!!!!
The hub is not available till Jan 2017-Checked All and No one has one-Dealer did search!
I see a walk around by buying a 2013 Driveshaft, Silver Hub, Hub Spacer, and the 2 End spacers at the end of each side of the axle (2012 Had a spacer and o-ring inside-2013 comes complete without o-ring) and the 2 end washers which also have a different stock #.
The cost would be about $270 for my mistake BUT is only about $70 more than the 2012 Parts I needed and Can not get till January.
Anyone have part # 705-501-531??? 2012 Hub???
Is there any parts person # at BRP that I can confirm my substitute parts will work.
EVERY part of the 2012 Drivetrain that I have not listed is the same for either year.

[trikermutha]

I am guessing you tried ebay??

[BLUEKNIGHT911]

Screwed up my hub and driveshaft by trying to bang them out? Ouch!!!!
The hub is not available till Jan 2017-Checked All and No one has one-Dealer did search!
I see a walk around by buying a 2013 Driveshaft, Silver Hub, Hub Spacer, and the 2 End spacers at the end of each side of the axle (2012 Had a spacer and o-ring inside-2013 comes complete without o-ring) and the 2 end washers which also have a different stock #.
The cost would be about $270 for my mistake BUT is only about $70 more than the 2012 Parts I needed and Can not get till January.
Anyone have part # 705-501-531??? 2012 Hub???
Is there any parts person # at BRP that I can confirm my substitute parts will work.
EVERY part of the 2012 Drivetrain that I have not listed is the same for either year.
You need to register ( for free ) to get the discounted prices. ....... Mike :thumbup:

[BajaRon]

There are several on eBay for less than $80.00

[Sarge707]

There are several on eBay for less than $80.00

They have to be 2012 705501531? I will check again?

[Chupaca]

As Mike said ...try Procaliber and the other is cheapcycleparts.com. They have much better stocking than BRP and dealers...:spyder:

[Sarge707]

There are several on eBay for less than $80.00

If you have seen 705501531 on Ebay please put a link- I can,t find any. Also the dealer network as checked by a couple different dealers show NON available in the entire system- Also previous editions are also Not Available for 2009-2011 models, RS, RT.
Checking several leads provided found the same result. These companies generally just ship them to you from BRP at a discounted price?
A walk around with the 2013 parts worked fine until I saw the Caliper Hanger and Brake rotor are also different so I'm up the creek and so are you IF you need a 2009-2012 Hub assembly?



If you have seen 705501531 on Ebay please put a link-Thanks!!!

[jcthorne]

The caliper hanger has nothing to do with the hub and will fit either, just needs to match 12 and older caliper. The axel just passes through. If your brake rotor is ok, it will fit the new wheel fine. You could even just buy an entire new 2015 wheel assembly.

[Sarge707]

The caliper hanger has nothing to do with the hub and will fit either, just needs to match 12 and older caliper. The axel just passes through. If your brake rotor is ok, it will fit the new wheel fine. You could even just buy an entire new 2015 wheel assembly.

The caliper hanger is quite different on the 2013 and is angled on the bottom where the 2012 holder is flat across.
Of course BRP assistance won,t let you talk to a parts person to help you do a walk around?

[billybovine]

705 501 531 has gone obsolete but 705 501 530 is available but it's black. Why not just order it and buy a rattle can of matching silver paint. In fact all hubs are the same from 2008 to 2013 just different colors. The types of brakes makes no difference.

[pegasus1300]

Pinwall cycle parts. Get a used one from a wrecked Spyder. Don't have number or website but you can google them.

[jcthorne]

The caliper hanger is quite different on the 2013 and is angled on the bottom where the 2012 holder is flat across.
Of course BRP assistance won,t let you talk to a parts person to help you do a walk around?

Yes, but that has to do with the different caliper that hangs on it, not the wheel and hub. A 2012 wheel fits on a 2015 bike just fine and the caliper hanger does not change.

As already stated, 2008 thru 2013 all wheels and hubs are interchangeable. The newer one piece wheel does not have a removable hub but it works fine on the older bikes.

[trikermutha]

http://www.ebay.com/itm/2012-Canam-Can-am-Spyder-RS-Free-USA-Shipping-Right-front-spindle-hub-/171051915057?hash=item27d37d1731:g:H0kAAOSwQItT~g5 n&vxp=mtr


http://www.ebay.com/itm/08-12-CANAM-CAN-AM-SPYDER-RS-LEFT-FRONT-WHEEL-HUB-SPINDLE-KNUCKLE-STEERING-/381533388643?hash=item58d5297f63:g:7gsAAOSwJb9Wq56 H&vxp=mtr

[billybovine]

Back wheel not front wheel.





http://www.ebay.com/itm/2012-Canam-Can-am-Spyder-RS-Free-USA-Shipping-Right-front-spindle-hub-/171051915057?hash=item27d37d1731:g:H0kAAOSwQItT~g5 n&vxp=mtr


http://www.ebay.com/itm/08-12-CANAM-CAN-AM-SPYDER-RS-LEFT-FRONT-WHEEL-HUB-SPINDLE-KNUCKLE-STEERING-/381533388643?hash=item58d5297f63:g:7gsAAOSwJb9Wq56 H&vxp=mtr

[trikermutha]

OK lets try this. If not I give up..

http://www.ebay.com/itm/Can-Am-New-OEM-Spyder-RS-Black-Rear-Rim-With-Wheel-Hub-2012-Prior-219400105-/201389742797?hash=item2ee3c39acd:g:K1YAAOSwX~dWtM7-&vxp=mtr

[Sarge707]

OK lets try this. If not I give up..

http://www.ebay.com/itm/Can-Am-New-OEM-Spyder-RS-Black-Rear-Rim-With-Wheel-Hub-2012-Prior-219400105-/201389742797?hash=item2ee3c39acd:g:K1YAAOSwX~dWtM7-&vxp=mtr

That looks Ideal!!! So the 2012 Sprocket would fit into this wheel and it looks like it comes with both axle bearings already installed!!!
My 2012 brake rotor would fit on this hub?? I could care less what color they all get brake dust on them anyway.
So the newer 2013 axle 1691 would fit on this with my 2012 side axle spacers?
If this works I will be in heaven!:yes:

[trikermutha]

That looks Ideal!!! So the 2012 Sprocket would fit into this wheel and it looks like it comes with both axle bearings already installed!!!
My 2012 brake rotor would fit on this hub?? I could care less what color they all get brake dust on them anyway.
So the newer 2013 axle 1691 would fit on this with my 2012 side axle spacers?
If this works I will be in heaven!:yes:


I cant answer those questions but thought the wheel and hub may work

I did a search on ebay for wheel hub..Maybe there something else you can use.

Good Luck

[billybovine]

That Ebay wheel is a good deal. Since you don't care about the color that's great. Rattle can of black paint will make the sprocket match and it will look great.

Your brake rotor will fit. 2012 and earlier RT and RS use the same rotor.

[Sarge707]

That Ebay wheel is a good deal. Since you don't care about the color that's great. Rattle can of black paint will make the sprocket match and it will look great.

Your brake rotor will fit. 2012 and earlier RT and RS use the same rotor.

Every Add with the Black Wheel/Hub Combo States 2009-2012 RS??? Are you sure it will work with the 2012RT???

:dontknow:

[jcthorne]

ALL spyders 2008 to 2013 use the same wheel except for color. There exist black, silver and chrome versions but they are dimensionally all the same.

[trikermutha]

There ya go..Looks like you got your answer :thumbup:

[Buckeye Bleau]

Pinwall cycle parts. Get a used one from a wrecked Spyder. Don't have number or website but you can google them.

Www.pinwallcycle.com :yes:

Joe

[Sarge707]

Thanks to Everyone! Sure beats waiting till Jan!!!