View Full Version : Are these the right Panels?
Naben
07-08-2016, 08:07 PM
My bike was in the shop and I asked the mechanic to remove the panels under the bike to help with the heat problem from the seat. he removed some panels, I just need to know are these the right ones. see attachedhttp://www.spyderlovers.com/forums/asset.php?fid=102323&uid=21310&d=1468026205
Copperman
07-08-2016, 08:10 PM
My bike was in the shop and I asked the mechanic to remove the panels under the bike to help with the heat problem from the seat. he removed some panels, I just need to know are these the right ones. see attachedhttp://www.spyderlovers.com/forums/asset.php?fid=102323&uid=21310&d=1468026205
I don't see any pictures.
Bam Bam and Pebbles
07-09-2016, 02:21 AM
Me neither.
Naben
07-10-2016, 07:38 AM
Me neither.
Can you see it now?133653
Naben
07-10-2016, 07:40 AM
Can you see it now?133654
My bike is a 2011 RT SM5
cuznjohn
07-10-2016, 07:56 AM
yes they are the panels
Naben
07-10-2016, 10:21 PM
yes they are the panels
Thank you for verifying. I bought some heat resistant film from the parts store and layered that under my seat also, and it does help. the seat is still warm, but not HOT like it was before.
Now all i have to do is put the heat shield for the right side opening that will block the heat from my leg and I should be set!:2thumbs:
spacetiger
07-11-2016, 04:41 AM
Get some of these to wrap the exhaust pipe: http://www.ebay.com/itm/Ceramic-Fiber-Insulation-Blanket-2300F-Kaowool-RT-8-Thermal-Ceramics-1-x12-x12-/201448546500?hash=item2ee744e0c4:g:s-0AAOSw1DtXEF0y
You can contain a lot of the heat inside the exhaust pipes; a better strategy than letting the heat come off the pipes inside the body then trying to keep the heat from from you.
I wrapped my pipes on the 2012 RTS, then later on the 2013 STL. Much easier to wrap around the pipes than the standard exhaust wraps. Use SS ties.
http://www.spyderlovers.com/forums/showthread.php?82216-2013-ST-My-heat-solution
Jerry
Naben
07-14-2016, 12:30 PM
Get some of these to wrap the exhaust pipe: http://www.ebay.com/itm/Ceramic-Fiber-Insulation-Blanket-2300F-Kaowool-RT-8-Thermal-Ceramics-1-x12-x12-/201448546500?hash=item2ee744e0c4:g:s-0AAOSw1DtXEF0y
You can contain a lot of the heat inside the exhaust pipes; a better strategy than letting the heat come off the pipes inside the body then trying to keep the heat from from you.
I wrapped my pipes on the 2012 RTS, then later on the 2013 STL. Much easier to wrap around the pipes than the standard exhaust wraps. Use SS ties.
http://www.spyderlovers.com/forums/showthread.php?82216-2013-ST-My-heat-solution
Jerry
OK, Thanks, I appreciate that tip.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.