PDA

View Full Version : June 12th/13th Laser Alignment in Boise



Alwaysonwheels
05-27-2016, 10:59 PM
Squared Away will be stopping in Boise after going to the Rally in Washington.

If you would be interested in getting this all important piece of performance improvement :thumbup: shoot me a message and we will get you on the list.

Thanks,
Tim

cptjam
05-28-2016, 01:09 AM
We are excited to come to Boise! Mac, bring your bike by to recheck after the tires get fixed. Jim, post up! Post up for your buddy, too! We had a couple more from Oregon who were interested. Post up!! Thank you to Tim for putting this together. See you soon!! Joe

cptjam
05-28-2016, 04:15 PM
PM to a few. Please post! Joe

cptjam
05-31-2016, 07:36 PM
Please confirm so we can schedule. Thanks! Joe

IdahoMtnSpyder
06-01-2016, 01:10 PM
Put me on the list for the 13th, Monday. Sunday is pretty much out for me, unless it would late in the afternoon, like 3 PM or so.

I'll do a tire check run this week, or next. I was pretty much out of it for two weeks after getting back home from Spyderfest. Felt like crap.

Mac

SpyderAnn01
06-01-2016, 03:36 PM
Put me on the list for the 13th, Monday. Sunday is pretty much out for me, unless it would late in the afternoon, like 3 PM or so.

I'll do a tire check run this week, or next. I was pretty much out of it for two weeks after getting back home from Spyderfest. Felt like crap.

Mac

Mac we are hoping to be headed home on Monday. We can get you on Sunday after 3:00 though

Dustoff
06-02-2016, 01:56 PM
Dustoff (Jim Skene) and Richard Jarrard are in !! Joe I may have shuttle Richard"s bike for him as he will be out of town on 12th, . I will have to do mine and then go get his. Sounds like you are wanting to leave on Monday the 13th.

SpyderAnn01
06-02-2016, 02:26 PM
Dust off yes we would like to get out on Monday first thing if at all possible.

Dustoff
06-03-2016, 01:02 PM
Do you folks have the address of the host and the estimated start time. I have tried calling him with no success !! Thanks !!

cptjam
06-03-2016, 11:34 PM
Address coming . Joe