key ring hole

[Dray]

My 2015 F3S keys do not have a hole in the body for a
key ring. Can I safely drill a hole in the top of the key
with out messing up the security chip? I would like to
hang my gate and door opener on the keys if possible.

Thanks in advance.

Dray

[Bob Denman]

Yup! :thumbup:

http://www.spyderlovers.com/forums/attachment.php?attachmentid=128381&stc=1

If you take a pin, it's easy to find the spot to drill; the pin will push right through the key, and happily bury itself into our other hand... :yikes:

[Mikind7]

Or this............http://www.amazon.com/MagicMoto-Holder-Saver-CAN-AM-Spyder/dp/B0191TZGVI?ie=UTF8&keywords=can%20am%20key%20holder&qid=1461086416&ref_=sr_1_1&s=automotive&sr=1-1

[z_light11]

My 2015 F3S keys do not have a hole in the body for a
key ring. Can I safely drill a hole in the top of the key
with out messing up the security chip? I would like to
hang my gate and door opener on the keys if possible.

Thanks in advance.

Dray


Short answer... Yes. Here it is straight from the master himself.


https://www.youtube.com/watch?v=tFmAHsv5JmA

[SPECTACUALR SPIDERMAN]

ok, so can someone tell me how to put a key ring on my IPS?

[Bob Denman]

:shocked: You'll need a welder... :shocked:

[BLUEKNIGHT911]

AND WE ARE ABSOLUTELY SURE THAT BRP HASN'T CHANGED THE CHIP POSITION WITH THEIR NEW MODULE ???? just a thought............Mike :bbq:

[Bob Denman]

It's in the same place... :thumbup:

[Chupaca]

There are a lot of nice key holders that give you the key ring option without having to drill a hole in the key. I use the sheath which works well and has the key ring hole at the bottom....choices choices...:dontknow:

[rpatsh]

I also use the Sheath that came with the keys.

[Dray]

Thanks Guys for all the input!! Gonna go drill couple of holes now.

Dray

[Bfromla]

Yup! :thumbup:

http://www.spyderlovers.com/forums/attachment.php?attachmentid=128381&stc=1

If you take a pin, it's easy to find the spot to drill; the pin will push right through the key, and happily bury itself into our other hand... :yikes:
Fyi few options for keyrings http://www.spyderlovers.com/forums/attachment.php?attachmentid=128386&stc=1http://www.spyderlovers.com/forums/attachment.php?attachmentid=128388&stc=1 & my fave keyport:http://www.spyderlovers.com/forums/attachment.php?attachmentid=128389&stc=1
https://mykeyport.com beware on drilling as the chip is super fragile & better to clone first!

[Bob Denman]

Thanks Guys for all the input!! Gonna go drill couple of holes now.

Dray
Just use the smallest drill bit that you can.
Make the hole JUST large enough, for your keyring to fit... tightly! nojoke

[bikerbillone]

Whoops, no longer in stock, not sure it will be according to Amazon. Makes me wonder why Amazon continues to show it.

[Peter Aawen]

And here I was, thinking Dave was getting a bit carried away posting the thread below alla-time, cos surely everyone knew he had the RIGHT answer?!? :yikes:

https://www.spyderlovers.com/forums/showthread.php?131086-Stop-!!!!-Don-t-do-it

But obviously not! :rolleyes: Anyhoo, as the man says, STOP!!!! Don't do it! There's a better solution than drilling & risking your key-chip! :thumbup: