Dust Hub?

[thereverend]

How important are these? I noticed I had one missing on the right front wheel..
Its the round inner cap..http://www.spyderlovers.com/forums/attachment.php?attachmentid=127054&stc=1http://www.spyderlovers.com/forums/attachment.php?attachmentid=127055&stc=1

[MEP]

They're missing from many Spyders out there, apparently with no harm being done. I figured, however, that they provide some degree of protection so I affixed mine using a little black silicone.

[Sccar]

Had the same issue. Ordered one and added silicone when I replaced it

[billybovine]

They are only decorative. Will cause no harm if missing. In the beginning not all models had them.

[ARtraveler]

My left front is missing on the 2014. Going to get one soon.

[NM Wrench]

when I got my 14 RT-S it was missing both dust caps. Replace with the Billet caps from Lamontster! :yes::yes::yes:

[thereverend]

when I got my 14 RT-S it was missing both dust caps. Replace with the Billet caps from Lamontster! :yes::yes::yes:

For the feedback...

[jaherbst]

when I got my 14 RT-S it was missing both dust caps. Replace with the Billet caps from Lamontster! :yes::yes::yes:

His are for the outside. The OP is asking about the inside cap I believe.

Jack

[kngfsh27]

His are for the outside. The OP is asking about the inside cap I believe.

Jack
Lamont does have them for the inside. They are $42 for a pair. Noticed one of mine was loose the other day.

[NM Wrench]

His are for the outside. The OP is asking about the inside cap I believe.

Jack
He makes them for both the inside and outside!

Sent from my VS990 using Tapatalk

[jaherbst]

Lamont does have them for the inside. They are $42 for a pair. Noticed one of mine was loose the other day.


Thanks, will look into that. I think I paid $17 for the plastic ones from BRP. They are also covered under warranty. But as a previous poster said use a

little black silicone to keep them mounted better. The plastic clips fit loosely and bumps will pop them off.

Jack

[Sccar]

I paid $4.99 plus shipping for mine

[thereverend]

I paid $4.99 plus shipping for mine
Thanks, I'll see if I can get a pair..

[jcthorne]

BRP also has some nice bolt on billet ones with the Spyder logo machined into them. Loosing a plastic dust cap was just an excuse to order a pair. They look good but are a bit more than $5. They will never fall off though as they are bolted on.

[vstrommer]

http://www.spyderlovers.com/forums/attachment.php?attachmentid=127069&stc=1

[Jim&Teresa]

Yes, these dust covers do come off! We took a survey at a gas stop of about twenty Spyders when riding last year...several of them had missing dust caps! Our 2014 RT still had them on....so I did what others did and added a little silicone adhesive to the inside just to help them stay on! :thumbup: So far, so good - they're still there!

Enjoy your riding! :D

This is the dust cap I am referring to (looks like they are approx. $5 each):

http://www.spyderlovers.com/forums/attachment.php?attachmentid=127075&d=1459611128

[Bensonoid]

Rob's Motorsports is having a clearance sale on the covers that vstrommer posted a picture of. They are $34.- I just ordered a pair. I had looked at them before and wanted to get them but they were way more.

[oldguyinTX]

http://www.spyderlovers.com/forums/attachment.php?attachmentid=127069&stc=1

Do you have a part number for this? I'm interested, and can't find them on Rob's website.

[JayBros]

I read about the sometimes loose inner caps here shortly after getting my Spyder. Went right out and applied some black silicone sealer and they're both now tightly affixed.

[Bensonoid]

The part number is 219400116 and it is at Rob's eBay store. Click on CanAm Spyder Accessories then click on Accessory Clearance.

[jcthorne]

http://www.spyderlovers.com/forums/attachment.php?attachmentid=127069&stc=1


Yes, those. Thanks for the pic!