PDA

View Full Version : LED H4 Headlight kit


Guzzi
03-17-2016, 03:23 PM
Have NEW, in the box H4 LED Headlight kit from Xenondepot for Can-Am spyder. Never used, and traded bikes, so you can buy for $80 including priority mail shipping. Contact: Guzzi (Ron Hewitt), mail@daytonaparts.com Paypal accepted.
Riceman
03-17-2016, 06:53 PM
Is this for 2 bulbs set?
Guzzi
03-17-2016, 09:18 PM
Is this for 2 bulbs set?
Yes, this is the kit with 2 lamps for Can-am spyder
Riceman
03-18-2016, 03:34 AM
Do happened to have the part number of the bulb?
Is this the bulb with a ribbon type foil in the back?
Bfromla
03-18-2016, 04:09 AM
Do happened to have the part number of the bulb?
Is this the bulb with a ribbon type foil in the back?
:agree: Good question as I just replaced a bulb & it may fit but the loop of the foil/braided cable for heatsink would be all in the way. :chill:
I had to get :helpsmilie: from someone with smaller hands as it was. Glad it all worked out, would have liked to upgraded at the time but:dontknow: It will happen soon enough least I have good idea of what I'm working with:doorag:
Guzzi
03-18-2016, 06:39 AM
Do happened to have the part number of the bulb?
Is this the bulb with a ribbon type foil in the back?

Part #H4-LED-HL Yes it has the ribbon style heat sinks
Riceman
03-18-2016, 07:10 AM
Pm me your paypal info.
Thanks
Guzzi
03-20-2016, 07:33 PM
sold!
guzzihack
03-21-2016, 04:06 PM
It's nice to hear there is another Guzzi guy out there. I've owned several over the years and still own two.
Guzzi
03-23-2016, 05:07 PM
It's nice to hear there is another Guzzi guy out there. I've owned several over the years and still own two.
Yea!! have had Guzzi's since 1970. Only have (1) left now, spend all my time on the F3! LOL!
Riceman
03-23-2016, 07:09 PM
Got the led lights today, Thank You.
Anyone can chime in on how to put this thing in? It's impossible to get in there without taking the top side off. Was wondering if anyone have taken that part off and know the location of nuts and fastener holding it in place.
MMMII
03-23-2016, 10:16 PM
Got the led lights today, Thank You.
Anyone can chime in on how to put this thing in? It's impossible to get in there without taking the top side off. Was wondering if anyone have taken that part off and know the location of nuts and fastener holding it in place.

Let me know if any of this (http://www.spyderlovers.com/forums/showthread.php?90674-SpyderPops-LED-Blinker-and-Spyclops-on-an-F3-Limited&p=1100740#post1100740) helps.