PDA

View Full Version : BRP 622 Trailer. Need a favor



Brentc
03-15-2016, 03:23 PM
As you can see my trailer is at the paint shop and unavailable. I was looking to replace the stock nose and tail emblems as part of the overhaul. It's a 2010 and I was hoping to find out are the nose and tail emblems the same size? And are they both approximately 2.75" in diameter (That's the size of my 2014 RTS emblems front and rear)? I found a couple here http://www.ebay.com/itm/Custom-Dynamics-SPY-EMB-SOB-RT-Spyder-Emblem-Set-Silver-Black-/262291944612?hash=item3d11d174a4:g:VZwAAOSwUuFWweM t&vxp=mtr that look nice and would like to inquire with the seller on their size. Any help appreciated, also if anyone know of better replacement emblems I am all ears......

http://www.spyderlovers.com/forums/attachment.php?attachmentid=125949&stc=1

Cruzr Joe
03-15-2016, 03:46 PM
As you can see my trailer is at the paint shop and unavailable. I was looking to replace the stock nose and tail emblems as part of the overhaul. It's a 2010 and I was hoping to find out are the nose and tail emblems the same size? And are they both approximately 2.75" in diameter (That's the size of my 2014 RTS emblems front and rear)? I found a couple here http://www.ebay.com/itm/Custom-Dynamics-SPY-EMB-SOB-RT-Spyder-Emblem-Set-Silver-Black-/262291944612?hash=item3d11d174a4:g:VZwAAOSwUuFWweM t&vxp=mtr that look nice and would like to inquire with the seller on their size. Any help appreciated, also if anyone know of better replacement emblems I am all ears......

http://www.spyderlovers.com/forums/attachment.php?attachmentid=125949&stc=1


Nose one is about 2.75, tail one is about an inch smaller

Cruzr Joe

revjvegas
03-15-2016, 04:09 PM
When I had mine painted, I got replacements from gearhead.com
The rear logo part# 219902468 is 48mm and the front logo part#219903609 is 68mm.
http://www.gearhead.com/oem-parts/can-am/cruiser.html?aribrand=BRP&s2=roadster#/Can-Am_(Bombardier)/Spyder_RT-Trailer%2c_2010/09-_Decals/59092/85300

Hope that helps out.

Brentc
03-15-2016, 04:11 PM
Thank you both. I'll check that web site. :thumbup:

Bob Denman
03-15-2016, 05:23 PM
I assume that you'll have it back in time for the SpyderFest caravan??? :dontknow:
Good Luck; we can't wait to see the results! :thumbup:

Brentc
03-15-2016, 05:30 PM
The local vocational tech shop is doing it as a class project. I stopped in today to see the progress, looking real nice. I told the teacher I will need it back for its amiden voyage and he said I should have it back the Friday before spyderfest. So that give me 1 day to install the new decals, and lights. Gonna be a busy weekend before spyderfest.

RockyMountainRider50
03-15-2016, 09:57 PM
As you can see my trailer is at the paint shop and unavailable. I was looking to replace the stock nose and tail emblems as part of the overhaul. It's a 2010 and I was hoping to find out are the nose and tail emblems the same size? And are they both approximately 2.75" in diameter (That's the size of my 2014 RTS emblems front and rear)? I found a couple here http://www.ebay.com/itm/Custom-Dynamics-SPY-EMB-SOB-RT-Spyder-Emblem-Set-Silver-Black-/262291944612?hash=item3d11d174a4:g:VZwAAOSwUuFWweM t&vxp=mtr that look nice and would like to inquire with the seller on their size. Any help appreciated, also if anyone know of better replacement emblems I am all ears......

http://www.spyderlovers.com/forums/attachment.php?attachmentid=125949&stc=1
Brent, this is Brock and my first recommendation would be Ebay or Amazon and I'm just curious on the estimated cost to have your RT-622 trailer painted. If you don't mind me asking? Considering the same thing here in Colorado.

Brentc
03-16-2016, 04:07 AM
Brent, this is Brock and my first recommendation would be Ebay or Amazon and I'm just curious on the estimated cost to have your RT-622 trailer painted. If you don't mind me asking? Considering the same thing here in Colorado.
Brock, I contacted our local tech school in October and asked if this would be a good class project. The instructor thought I'd would. Only charge materials, which is around $500. I couldn't ask for a better arrangement. I actually got to meet the student doing the job yesterday. He was pretty excited to be getting some tri coat experience.

Brentc
03-19-2016, 11:46 AM
When I had mine painted, I got replacements from gearhead.com
The rear logo part# 219902468 is 48mm and the front logo part#219903609 is 68mm.
http://www.gearhead.com/oem-parts/can-am/cruiser.html?aribrand=BRP&s2=roadster#/Can-Am_(Bombardier)/Spyder_RT-Trailer%2c_2010/09-_Decals/59092/85300

Hope that helps out.


Found a few sets on eBay and only one seller got back to me with an attempt at measurements. He held a tape measure next to package and sent me a picture. Based on my take off, it appears the smaller is 50 mm and the larger is 65 mm. Based on the measurements revjvegas noted above I'm thinking the difference could be the picture?