Ride-On and FOBO

[Scoot2Mtns]

Is Ride-On tire sealant compatible with using a tire pressure sensing FOBO system? Or will gum up the FOBO?

[BajaRon]

Is Ride-On tire sealant compatible with using a tire pressure sensing FOBO system? Or will gum up the FOBO?

Q: Is Ride-On Tire Pressure Monitor (TPMS) Friendly?

A: Yes. Ride-On (TPS) is tire pressure monitor sensor (TPMS) friendly in TPMS sensors that are hermetically sealed. Most sensors on motorcycle, autos and commercial fleet applications are hermetically sealed. We do not recommend the use of Ride-On in 2009, 2010, and 2012 Honda Gold Wings as their TPMS sensors are not potted (hermetically sealed). Also certain KTM 1190 and 1290 Adventures may have unsealed (non-potted) electronics and therefore should avoid the use of our sealants.
If your sensors are not sealed, then we do not recommend the use of Ride-On with them. Although using Ride-On with these types of sensors does not always create issues, we as the manufacturer of Ride-On do not recommend using our product in applications with TPMS systems without potted electronics. Even moisture contained in the compressed air can enter the electronics and over time create issues not related to any tire sealant. We recommend that you check with your dealer or manufacturer to determine whether your TPMS sensor has potted electronics and batteries.

You can read more here. http://www.ride-on.com/tpms

[Pampurrs]

I have the FOBO and use Ride-On with no problems.

Pam