Add those Frunk Flanking Lights?

[ramblin5]

We have the basic RT rather than the Limited but I really like the looks of those lights on each side of the Frunk on the Limited. Can those be added to our RT?

[NM Wrench]

If your talking about the fog lights then yes they can be added

Sent from my VS990 using Tapatalk

[ramblin5]

If your talking about the fog lights then yes they can be added

Sent from my VS990 using Tapatalk

Not sure I would call them fog lights but maybe they are. They are the long lights that run down each side of the Frunk. Look like an extra set of headlights to me.

[NM Wrench]

I have seen RT-S and they are fog lights.

Sent from my VS990 using Tapatalk

[ramblin5]

I have seen RT-S and they are fog lights.

Sent from my VS990 using Tapatalk

Yes, it looks like you have them on the one in your avatar. Guess I'll look them up online as fog lights.

[BLUEKNIGHT911]

The fog lights you are referring to come in a completely different housing than the one on the basic RT......I checked a Parts fiche and couldn't find the one the LTD has ( fog lite housing ). So you would need that plus all the parts to the actual fog light itself......This could be quite expensive.....Adding some different FOG lights wouldn't be expensive at all......OEM will be ......Mike :thumbup:

[Bob Denman]

The foglight kit part number is: 219400579. Check with your dealer to see what they'd charge for nailing them into place... :thumbup:

[ARtraveler]

I had them installed on the 2011 A & C (basic RT). They came on my 2010 RTS (= to the limited that year), and on my 2014 RT-S.

They are not that bright, but they do light up the front of the RT for visibility.

[Bob Denman]

I had them thrown in on the deal for my 2010 A&C... :thumbup:
:agree: They do more to help you BE seen; rather than help you see... nojoke

[ramblin5]

I had them installed on the 2011 A & C (basic RT). They came on my 2010 RT-S (= to the limited that year), and on my 2014 RT-S.

They are not that bright, but they do light up the front of the RT for visibility.

Thanks. Do you mind telling me what it cost for the install? I found the kit for around $500.

[Bob Denman]

BRP's instruction sheets, say that it takes 1.5 hours... see what your dealer says about it.
Good Luck! :thumbup:

[ARtraveler]

I paid kit price plus 1.5 hours install. :thumbup:

[ramblin5]

I paid kit price plus 1.5 hours install. :thumbup:

Thanks!

[NM Wrench]

Saw these on Facebook 250.00 new
https://www.facebook.com/groups/821240244593173/permalink/1060021014048427/