Cup Holder

[Sam Mac]

Who sells this Cup Holder?

[NM Wrench]

Check lamonster

Sent from my VS990 using Tapatalk

[Sam Mac]

Check lamonster

Sent from my VS990 using Tapatalk

I did but I didn't see one like the one in the pic that I posted on his site.

[NM Wrench]

That looks like someone's diy setup. Never seen one exactly like that from any sponsors on here

Sent from my VS990 using Tapatalk

[pontow]

I think it is the one made by Ram Mount themselves. Try here:

http://www.rammount.com/part/RAM-B-132U

[TEWKS]

I think it is the one made by Ram Mount themselves. Try here:

http://www.rammount.com/part/RAM-B-132U

^ :thumbup:

http://www.amazon.com/Mount-RAM-B132R-Drink-Holder-U-Bolt/dp/B000WJ3I1M/ref=sr_1_3/191-9796834-8620033?ie=UTF8&qid=1449887130&sr=8-3&keywords=ram+mount+cup+holder+base

Looking at the pic again they have a ram ball coming off of the handlebar stud. The stud connector appears not to be part of the kit in the link.

Pat

[Gray Ghost]

Who sells this Cup Holder?

Ram has a lot of ways to mount their products, including the drink holder. Some that look like they may help you:

http://www.rammount.com/part/RAM-B-342U

http://www.rammount.com/part/RAM-B-367U

This is what I use:

http://www.rammount.com/part/RAM-B-132R-2U

[NautiBrit]

It is a Ram product and I have one on my RT. One word of caution, it is a gimbal mount designed for leaning bikes and would tilt in the wind and spill some of my drink. I immobilized the gimbal and it now works perfectly.

[rick_w]

We do have a couple of mounting options rather then the Fork Stem Mount to go with the RAM Drink Cup Holder.

http://store.valueaccessories.net/SpyderRTRAMMountKit.aspx

http://store.valueaccessories.net/Can-AmSpyderHandlebarMountKit.aspx

[Upstater]

Check out Providence Spyder Accessories at:
http://www.providence-spyder-accessories.com/

Kerwin has some great products. I purchased the handlebar mount system. You can mount a cup holder or X-grip. Very simple and works great. Lots of options out there. Do your homework.

[rick_w]

Check out Providence Spyder Accessories at:
http://www.providence-spyder-accessories.com/

Kerwin has some great products. I purchased the handlebar mount system. You can mount a cup holder or X-grip. Very simple and works great. Lots of options out there. Do your homework.

One of the links I provided above was for the Providence Handlebar Mount. Nice thing is this mount will fit just about any Spyder. In most cases on right or left side.
http://store.valueaccessories.net/Can-AmSpyderHandlebarMountKit.aspx

We are selling those Handlebar Mounts now. They look good and are very adjustable. He has been making some really nice stuff for the Spyders, we may start carrying the powered handlebar mounts also.
Rick
http://store.valueaccessories.net/images/products/detail/ProvidenceHandlebarMount.jpg

[Devious56]

I really do like my ride2go, and Spyder2go drink holders much better than I thought I would.

David

http://www.spyderlovers.com/forums/attachment.php?attachmentid=121070&stc=1~

[jaherbst]

Only Guys with "Honda Goldwings" use cup holders. You know the guys in shorts, no helmut, penny loafers with no socks. :joke: If you use a full face helmut you might want to reconsider.

Jack

[Upstater]

One of the links I provided above was for the Providence Handlebar Mount. Nice thing is this mount will fit just about any Spyder. In most cases on right or left side.
http://store.valueaccessories.net/Can-AmSpyderHandlebarMountKit.aspx

We are selling those Handlebar Mounts now. They look good and are very adjustable. He has been making some really nice stuff for the Spyders, we may start carrying the powered handlebar mounts also.
Rick


Sorry, I didn't realize you have collaborated with Kerwin. That's awesome! Looking forward to Christmas morning. I slipped a few VA website ideas to my wife.

[Hawkmoon]

Butler has a holder for the driver.