Pitbull Shock Relocator Install?

[JimboRTS]

I have a 2012 RTS and am wondering if any plastic panels have to be removed to install Pitbull shock relocators ?

Jim

[Bob Denman]

It really makes it a whole lot easier, if the frunk is removed... :thumbup:

[Chupaca]

You do not on the RS and believe you don't on the RT but it sure makes it a lot easier. I installed them shortly after I did the BajaRon swaybar and they sure made a difference...if you take your time and follow the instructions it is a relativly easy job...:thumbup:

[Empty Pockets]

Watched the guys at pitbull install On my RTS last October they did not take off the frunk

[Rich]

What do the shock relocators do for the bike? I'm in the process ordering the sway bar and links from Bajaron and have found a place to do the laser alignment but haven't run across anything about shock relocation on the Spyder. Thanks.

[Empty Pockets]

What do the shock relocators do for the bike? I'm in the process ordering the sway bar and links from Bajaron and have found a place to do the laser alignment but haven't run across anything about shock relocation on the Spyder. Thanks.

I believe They are only needed on model year 2010-2012 RTs

[Rich]

Got it. Thanks!

[Bob Denman]

What the re-locators do for the pre-2013 bikes, is literally stand the shocks more upright...
It makes the movement of the wheels act more directly upon the suspension system; I think that it essentially stiffens the front-end of the bike up a little bit...
The new angle that the shocks are mounted at, is the same angle as on the 2013 and later bikes...

[Roadster Renovations]

We sell an easy to install stiffener that fits between the coils to help make the suspension better. They work well and are pretty inexpensive. Lifetime warranty.

http://dochumphreys.wix.com/roadster#!products/cdk6