radar detector

[purplepig]

Looking for ideas where to mount radar detector on an RT. Preferably easily removed. Ran a search and not much came up. Thanks. Dan

[r1100rider]

Looking for ideas where to mount radar detector on an RT. Preferably easily removed. Ran a search and not much came up. Thanks. Dan
I mounted mine on a bracket I made for the handle bars it has a flat plate with Velcro but the problem is that you can't see or hear it so after trying blue tooth dangles and wiring to helmet speakers I found mark pryne industries makes a super brite led that is fired off the speaker out and I mounted it up under windshield in my line of site it works great and I don't have to think to look down and see the unit

[DrewNJ]

I use an irad 900 so I mount the actual detector just behind the frunk lid and the display shows on my phone. I also hear it in my helmet with my sena paired to my phone. Works great!

Sent from my SCH-I545 using Tapatalk

[purplepig]

I mounted mine on a bracket I made for the handle bars it has a flat plate with Velcro but the problem is that you can't see or hear it so after trying blue tooth dangles and wiring to helmet speakers I found mark pryne industries makes a super brite led that is fired off the speaker out and I mounted it up under windshield in my line of site it works great and I don't have to think to look down and see the unit

Can you post some pictures? Thanks, Dan

[Bob Denman]

Get one of JT's mounts! :thumbup:
He's a site sponsor too!

http://gnipsel.com/spyderstore/

[Chupaca]

:agree: ram ball mount on JT's bar and your set...I use waze which tells me where the cops are hiding...:thumbup:

[IdahoMtnSpyder]

Radar detector?? You don't need no stinkin' radar detector! Just don't go more than speed limit + 5. :lecturef_smilie: Never been stopped yet and move smoothly with traffic. Surprisingly consistent around the country.

[SPYD3R]

Looking for ideas where to mount radar detector on an RT. Preferably easily removed. Ran a search and not much came up. Thanks. Dan

this is NOT and RT Dan, but it may give you some ideas....
this is how i mounted mine on my F3....
http://www.spyderlovers.com/forums/attachment.php?attachmentid=113096&stc=1 http://www.spyderlovers.com/forums/attachment.php?attachmentid=113097&stc=1
and this is how i mounted the clip to the detector... it's a clip from a pants hanger, i cut the 2 ends of, and glued on to the bottom, and clip it to my cross-bar...
http://www.spyderlovers.com/forums/attachment.php?attachmentid=113098&stc=1
best of luck in your DIY project....
Dan P
Easley, SC
SPYD3R F3-S

[Ex Winger]

Radar detector?? You don't need no stinkin' radar detector! Just don't go more than speed limit + 5. :lecturef_smilie: Never been stopped yet and move smoothly with traffic. Surprisingly consistent around the country.
I agree.I ride to enjoy the scenery.When I want to go for a spirited ride I enjoy the back roads.Plus no radar detectors allowed up here.
Bill

[pitzerwm]

this is where I put mine:

http://www.spyderlovers.com/forums/attachment.php?attachmentid=113108&stc=1

[nakerr]

:agree: ram ball mount on JT's bar and your set...I use waze which tells me where the cops are hiding...:thumbup:

This is the way I mounted my detector.

[nakerr]

I agree.I ride to enjoy the scenery.When I want to go for a spirited ride I enjoy the back roads.Plus no radar detectors allowed up here.
Bill

In Canada they are allowed in BC, Alberta and Saskatchewan. In most of the other provinces you not only get a big fine but the detectors are classified as contraband and will be confiscated without compensation.