Sturgis bound!

[can-am]

Loaded and ready to go!http://www.spyderlovers.com/forums/attachment.php?attachmentid=112246&stc=1

[Semperfi66]

I mount my quad like that in the back of my Ram when I tow my travel trailer but never thought of my Spyder up there. How did it fit??:clap:

[kbwitt]

What camp ground you staying at? What dates will u be there?

[Bob Denman]

Have a safe and fun trip! :2thumbs:

Take lots of pictures for the rest of us! :D

[SpyderAnn01]

OMG, that must be quite exciting getting your Spyder in and out of there. :yikes: Have a great trip.

[Semperfi66]

OMG, that must be quite exciting getting your Spyder in and out of there. :yikes: Have a great trip.
I have to put my quad in 4 wheel low to get up the first ramp then the second ramp inside the truck to get the angle to allow the tail gate to close on a 45 degree angle. I don't think you could get enough traction with the rear tire to do this with the spyder.;)

[can-am]

I have an 8' box, and I have about 1/2" clearance on each side. It took a couple times loading to get it down pretty good. The ramp in the truck is at 20 degrees, the loading ramps are 7' on the outside and 6' in the middle. We will be at Shade Valley Campground from 7/27 and leaving 8/9. Yes there will be a lot of pictures taken!

[ARtraveler]

:agree: Please take and share a lot of pictures. The Black Hills and surrounding area are prime :spyder2: riding country. Devils Tower is also great if you have the time.

[MSGTDOC]

Will be heading out to Sturgis this coming Friday. Staying at Devils Tower KOA about 75 west of Sturgis. Safe travels on the way for anyone going. :doorag:

[kbwitt]

I have an 8' box, and I have about 1/2" clearance on each side. It took a couple times loading to get it down pretty good. The ramp in the truck is at 20 degrees, the loading ramps are 7' on the outside and 6' in the middle. We will be at Shade Valley Campground from 7/27 and leaving 8/9. Yes there will be a lot of pictures taken!

Hi we will be at Shade Valley 8-3 8-5 driving in from phoenix east valley, 2014 white RT flag wrapped.

[kbwitt]

I have to put my quad in 4 wheel low to get up the first ramp then the second ramp truck to get the angle to allow the tail gate to close on a 45 degree angle. I don't think you could get enough traction with the rear tire to do this with the spyder.;)

There is a company that makes a power lift for spyder truck beds.
Google Rampage Power Lift. It puts it in back first so not to sure how the wind dynamics will be. Even with windshind shield down.

[Semperfi66]

There is a company that makes a power lift for spyder truck beds.
Google Rampage Power Lift. It puts it in back first so not to sure how the wind dynamics will be. Even with windshind shield down.

Thanks I looked that loader up. You would probably have to take the windshield off. It would not work for me as tail gate is down and I could not tow my 36 ft travel trailer