Time to switch out my guage on the RT

[nyfdtsdemt]

I here you can disconnect the gauge and the digital panel takes over

so what can i put in those two holes if i take them out?????

[Bob Denman]

I believe that there are blanks you can use, to fill in the empty spots.
I believe that there was a thread bouncing around in the RT shop talk area just a little while ago.
With some research; you should be able to find it. :thumbup:

EDIT: It wasn't in there... I'll keep trying to find it for you...

[finless]

You have to unplug both gauges to get the digital display.

This is what I put in one side. A digital volt gauge.

http://www.spyderlovers.com/forums/showthread.php?76359-Latest-Farkle-Digital-volt-gauge-CHEAP!&highlight=gauge

On the other side I have a RAM mount right now but plan on putting a compass there as soon as it arrives.

Bob

[IdahoMtnSpyder]

I here you can disconnect the gauge and the digital panel takes over

so what can i put in those two holes if i take them out?????
Picture of wife in one, girl friend in the other? :roflblack: :roflblack: :roflblack: :roflblack:

[Omcge]

Clock and voltmeter

[samewok]

Volt meter and dual USB.

[Larry rt]

http://www.spyderlovers.com/forums/asset.php?fid=80894&uid=13368&d=1425944319

[ursamajor35126]

Volt meter and dual USB.
+1 on the volt meter and dual USB (from SL Vendor JT's machine shop)

[KennW]

You have to unplug both gauges to get the digital display.

This is what I put in one side. A digital volt gauge.

http://www.spyderlovers.com/forums/showthread.php?76359-Latest-Farkle-Digital-volt-gauge-CHEAP!&highlight=gauge

On the other side I have a RAM mount right now but plan on putting a compass there as soon as it arrives.

Bob



You must have a different wiring system in the States if you need to disconnect both gauges to allow the fuel and temp digital indicators to show.
Every RT I've had anything to do with or discussed with owners on the subject indicate only a single gauge needs to be disconnected for digital gauges to start working.

[KennW]

Forgot to add once a gauge is disconnected "both" gauges stop working.

[finless]

You are correct somewhat. I did a experiment on this trying to see if I could keep the analog temp gauge working but remove the fuel gauge.

If you disconnect the temp gauge but leave the fuel gauge, the digital display will not switch. If you unplug the fuel but leave the temp gauge, then you will get the digital display but the temp gauge pegs.

This is on a 2011 RTS.


http://www.youtube.com/watch?v=c8mR5jA3H8E

Bob

[Madrebel]

Picture of wife in one, girl friend in the other? :roflblack: :roflblack: :roflblack: :roflblack:

😂😂😂

[Empty Pockets]

[QUOTE=finless;plan on putting a compass there as soon as it arrives.
[/QUOTE]

What type of compass digital?

[Pennyrick]

Lot's of choices. Here are mine.




http://www.spyderlovers.com/forums/attachment.php?attachmentid=109762&stc=1http://www.spyderlovers.com/forums/attachment.php?attachmentid=109763&stc=1
I here you can disconnect the gauge and the digital panel takes over

so what can i put in those two holes if i take them out?????

[yamahog]

Here is what I replaced mine with, now maybe my gopro will stay charged for the trips.:2thumbs: and only cost me $20 and some time with the dremel :yes::yes::yes:

[AH-NO-1]

What gauge are you switching out, and what year is your Spyder. Thanks Dave