Questions

[ranger1369]

I have been reading the forum for several years and have recently purchased my first Spyder. I have been searching the forum for info on wiring the fuze box. Can you use plug in fuse taps to hookup the switched power to the fuze box or is there a better way. Second question, I am going to install the Scorpio SR-i900 alarm. Will the RS adapter kit work on the RT. I don't see one for the RT.

[trikermutha]

No it will not and scorpio does not have a adapter for the RT yet..

[PrairieSpyder]

I'm not able to answer your questions, so I'll just say :welcome:

[Bob Denman]

Me too... :welcome: :2thumbs:
:nopic:

[KennW]

The FZ-1 Fuse Box although a little expensive is by far the best and easiest option when looking at an adding a fuse box. Of course my opinion only.

[Netminder]

Scorpio provides universal wire taps, that worked fine when I did my installation, just make sure you pinch them good. It is a bit expensive, but it is a great alarm. And you are protecting something that is worth it!!:thumbup::thumbup: A shop manual also helps for the wiring specs. Oh by the way :welcome:

[ranger1369]

Shop manual is due Monday. Alarm is due Tuesday. I have the fuze box and I'm trying to figure out where to tap for the switched power. I was hoping to use the "add a fuse" tap in the main fuse box. I am waiting for the alarm to come in before I start removing panels.

[Tango]

:congrats: :welcome: :thumbup: :spyder: