In search of parade flag holder

[smurfette]

Howdy!
Well, it's time for a spring spruce up for Smurfette (my 2010 RT/AC SE 5). So far, I've got a new saddle, vented windshield, drivers backrest, and trailer hitch. Will be having those installed soon. My question for everyone is : where can I find a parade flag holder that will accommodate a 3' x 5' flag that will mount to the new trailer hitch? I've tried looking at SL sponsors, but haven't seen anything yet. Many thanks for your help!:dontknow:

[Oldmanzues]

Is their a different hitch now. I have a 2010 RT with a hole in the middle the ball goes in. If the same I use a RIVCO upright #9000 ( I think) thru the opening with a spacer to fill the difference the single olt of the upright and the diameter of the hole in the hitch. If the hitch is different no idea. Seal floor boards had one at one time, but it does not seem to be on the site anymore and I have unbable to get any word back from him on it. I would guess possible legal problems with something breaking.
I have several thousand miles on mine with a problem, but I do change the bolt every couple years. I will attempt to post a pic, sorry about the dirt, PGR mission in the rain
If you are interested I can take a pic of the set as I use on missions. Let me know
Oldmanzueshttp://www.spyderlovers.com/forums/attachment.php?attachmentid=105191&stc=1

[Dragonfly]

I bought mine from RIVCO.
Ball Hitch Mount # Product Code: HWK010
Flag Holder # Product Code: PF1000
Then I added a piece of Tire between the Ball and Hitch Mount as a spacer and vibration damper and a couple of rubber tubing for a tight fit of the mounting rods. The flagpoles are from Lowe's 6 ft wooden Curtain Roods
http://www.spyderlovers.com/forums/attachment.php?attachmentid=105206&stc=1 http://www.spyderlovers.com/forums/attachment.php?attachmentid=105207&stc=1

[Don in E Texas]

..I think John at Seal Boards has what you might be looking for. One of the site sponsers.

Don

[captblack]

I made one ... You might need to trim your fender a little. I use a latch pin to secure the flagpole in the mount.

http://www.spyderlovers.com/forums/attachment.php?attachmentid=105209&stc=1http://www.spyderlovers.com/forums/attachment.php?attachmentid=105210&stc=1

[ChopperPilot]

Thank you all for your responses. Now to decide.