Fuel cover

[satownsendsr]

Has anyone put a fuel door cover on an OEM seat for a RT Limited or other models. I am looking fora way to fuel up without having to raise the seat. I have looked at most all of the auto parts stores and they seem to have quit carrying them. If you did install one, where did you purchase it and what size?

[bcoulter19]

here is one persons solution. i'm sure there are others.

http://www.spyderlovers.com/forums/s...?65326-Can-you (http://www.spyderlovers.com/forums/showthread.php?65326-Can-you)

Bill C.

[Bob Denman]

That's the one that I was going to point out as well...
Although I think that MotorcycleDave will also modify the stock seat in a similar manner... :thumbup:

[Orange Spyder Man]

you can order a fuel door on ebay... starting about $12

osm

[bluestratos]

I found the smallest on they sell on Amazon, much smaller than the stardard ones. I covered in black vinyl to match the seat to make it blend in better. It works great and people think it is stock.

[ARtraveler]

They have you covered. The fuel door is very convenient if you are carrying a passenger or other gear on the seat. :thumbup:

[aeroshots]

I found the smallest on they sell on Amazon, much smaller than the stardard ones. I covered in black vinyl to match the seat to make it blend in better. It works great and people think it is stock.

Thanks for steering us in the correct direction for the fuel door. Your work is very nice. That particular door is pricey compared to others, but might just be the perfect one.

[BLUEKNIGHT911]

To see it go to www.spydertv.net (http://www.spydertv.net) and look under VIDEOS....."THIS IS MY SPYDER"....MIKE LONG.............:thumbup:

[Bob Denman]

I found the smallest on they sell on Amazon, much smaller than the stardard ones. I covered in black vinyl to match the seat to make it blend in better. It works great and people think it is stock.
Do you happen to have access to the part number of the one that you ordered? :thumbup:

[aeroshots]

Do you happen to have access to the part number of the one that you ordered? :thumbup:

Looks like this is the one he used. There is even a review written.
http://www.amazon.com/All-Sales-6044GKL-Billet-Fuel/dp/B005TCHTQM

I've been looking for one a bit less expensive in the same size. Might just have to bite the "billet" and get this one.

[garb55]

here is one persons solution. i'm sure there are others.

http://www.spyderlovers.com/forums/s...?65326-Can-you (http://www.spyderlovers.com/forums/showthread.php?65326-Can-you)

Bill C.

That is my bike and after using it for fill ups all year it still looks good
and the price was right $0.00:yes:
I always have my dogs and there seat is strapped on the passengers hand grips so this is very handy
I am thinking about doing the same to the other side for checking the oil
Don

[satownsendsr]

Blueknight, I tried the link but all I can seem to get is the French version.

[Bob Denman]

Looks like this is the one he used. There is even a review written.
http://www.amazon.com/All-Sales-6044GKL-Billet-Fuel/dp/B005TCHTQM

I've been looking for one a bit less expensive in the same size. Might just have to bite the "billet" and get this one.

Thanks! :thumbup:

[BLUEKNIGHT911]

Blueknight, I tried the link but all I can seem to get is the French version.

I know, however the video is in English.......it's easy to figure it out ...first go to Video's then ......My Spyder..........Mike :thumbup:

[satownsendsr]

Got it. Thanks

[bluestratos]

Here is a link to the fuel door I purchased through amazon. It is the best fit for the small area of seat that this available.






http://www.amazon.com/gp/product/B005TCHTQM/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

[Bob Denman]

5.5" Ring, and a 4.125" door... thanks! :thumbup:
These suckers ain't cheap... :shocked:

[bcoulter19]

I know, however the video is in English.......it's easy to figure it out ...first go to Video's then ......My Spyder..........Mike :thumbup:

I must be blind. I can't find the video your talking about. HELP!!!! Please!!!!

[Bob Denman]

http://spydertv.net/en/videos-2/this-is-my-spyder/?wb_video_page_id=&movie=1573

[BLUEKNIGHT911]

http://spydertv.net/en/videos-2/this-is-my-spyder/?wb_video_page_id=&movie=1573

.....Thanks Bob, why is your link in English.......mine and others are coming back in "FRENCH " only.......Mike :thumbup:

[Bob Denman]

:shocked: Je ne sais pas... :shocked:

:roflblack:

I actually just took your link, and followed it out to your video... :thumbup:

[Bogie]

I had my dealer order and install a Corbin seat before I even took delivery of my 2014 RT because I didn't want my wife to have to dismount every time I got off the Spyder. You would think they would change the design and add the fuel door from the factory.


Sent from my iPad using Tapatalk

[bcoulter19]

Thanks guys as my kids would say I must have been having a "Senior Moment" LOL. even though I'm not yet considerd a senior by society.

Bill C.

[satownsendsr]

Bogie, I started out ordering the fuel cover door from Amazon. My money left immediately but nothing on the order. I had to contact Amazon which put me in touch with the actual seller. There excuse was that they didn't have one. Told me that the shipping department said it would go out in 5 to 10 business days. Now this was already after a week had passed from the order date. I canceled the order and got my money back. I went ahead and got an Ultimate Seat since I have back issues anyway and it came with the door installed. Lesson learned.
😕😩⌛

[Orange Spyder Man]

I would be leery about sitting on a Spyder while someone fueling it up... for fear of a fire hazard.. a small spill could turn into a big fire !!

osm

[aeroshots]

Bogie, I started out ordering the fuel cover door from Amazon. My money left immediately but nothing on the order. I had to contact Amazon which put me in touch with the actual seller. There excuse was that they didn't have one. Told me that the shipping department said it would go out in 5 to 10 business days. Now this was already after a week had passed from the order date. I canceled the order and got my money back. I went ahead and got an Ultimate Seat since I have back issues anyway and it came with the door installed. Lesson learned.
����⌛

I ordered from them also. Same story except I've not cancelled the order yet.:( Very expensive part compared to the others, but I could not find the size specifications on others.

[satownsendsr]

Orange Spyder Man, I agree. But it is nice to get to the gas cap without lifting the seat

[sduskin]

gas cover came from summit racing

http://www.spyderlovers.com/forums/attachment.php?attachmentid=105657&stc=1

[Orange Spyder Man]

Orange Spyder Man, I agree. But it is nice to get to the gas cap without lifting the seat

I agree it would surely be more convenient ... but think safety trumps saving a minute more to re-fuel..

osm

[aeroshots]

I agree it would surely be more convenient ... but think safety trumps saving a minute more to re-fuel..

osm

About 15 minutes more for me to refuel if my wife has to dismount. If an issue occurs, I'll do what I must and put her over my shoulder and run off. Safety is very important I'll agree, but it does not trump all things. Balance of safety and reality is the norm for some folks. Otherwise we would all be in cages
.http://www.spyderlovers.com/forums/attachment.php?attachmentid=105665&stc=1

[Highwayman2013]

http://www.amazon.com/gp/product/B0007YZWLQ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

http://www.spyderrt.info/u-do-it (http://www.amazon.com/gp/product/B0007YZWLQ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1)

[aeroshots]

It took 6+ weeks to get the fuel door from amazon. In the mean time I purchased an ultimate seat. The door is available if anyone is still looking. I did not even open the package. The door is this one http://www.amazon.com/All-Sales-6044GKL-Billet-Fuel/dp/B005TCHTQM
Available at $75.

[MS_Spyderman]

Don, can you post a pic of the back side of the seat so we can see the cut you made on the pan? I'm getting ready to do this mod.

[Bob Denman]

It took 6+ weeks to get the fuel door from amazon. In the mean time I purchased an ultimate seat. The door is available if anyone is still looking. I did not even open the package. The door is this one http://www.amazon.com/All-Sales-6044GKL-Billet-Fuel/dp/B005TCHTQM
Available at $75.

:nopic:
Do you still have it, and can we pay you through PayPal?

[aeroshots]

:nopic:
Do you still have it, and can we pay you through PayPal?

Yes. Shot me a pm. On the road now but will reply to you ASAP

SALE PENDING

[Bob Denman]

PM being sent... :thumbup:

[aeroshots]

It took 6+ weeks to get the fuel door from amazon. In the mean time I purchased an ultimate seat. The door is available if anyone is still looking. I did not even open the package. The door is this one http://www.amazon.com/All-Sales-6044GKL-Billet-Fuel/dp/B005TCHTQM
Available at $75.
SOLD

[garb55]

Don, can you post a pic of the back side of the seat so we can see the cut you made on the pan? I'm getting ready to do this mod.

http://www.spyderlovers.com/forums/showthread.php?65326-Can-you

Post #12 were the best pictures I could take of the underside of the seat [I should have taken the pictures of the underside with the seat off]
The cut is straight
Start at top right where seam on top side is
I cut down to bottom seam but if I were to do it again I would cut toward the rear of the bottom seam about 2 inches [this would give more room
Only cut the plastic pan not the vinyl or foam
Remove only enough staples from top and bottom [maybe 3 or 4 ] to be able to fold vinyl and foam out of the way and cut pan [take your time so you do not cut vinyl]
Then when you fold vinyl and foam back it will be tight without adding staples
I did change from Velcro latch to a magnetic cabinet latch
Don

[BLUEKNIGHT911]

If you are contemplating doing a GAS DOOR.....and haven't seen My post and / or the Spyder TV video.......What I did and this makes for a much neeter and easier job is ........Have a propane torch ready ( this is easiest ) or a charcoal grill, or some very very hot heat source. Because all the bolt holes you make will be done with a large RED HOT NAIL.....Put the gas door where you want it , and poke a hole for the first bolt ( at the top ).....check to make sure this is OK because you can still move the door slightly now........put in a bolt finger tight.......Poke a hole in the bottom, put in another bolt ......do all the rest.............For the large hole I used a piece of large muffler pipe ....got it red hot and melted a hole ( my hole was smaller than yours is going to be )......you can probably use a food can of appropriate size..........HOLD THE HOT METAL NAILS OR CAN WITH VISE GRIPS.........Doing it this way prevents tearing / snagging the seat material ( it has strong nylon threads woven thru it )........Good Luck .....Mike :thumbup: