PDA

View Full Version : frunk issue



krafael5
03-12-2015, 11:52 AM
Help. My 14 rts frunk does not close gently. I sometimes have to close it several times by tapping the frunk hard onto the latch. Am i doing something wrong or is it a loose latch?

oldguyinTX
03-12-2015, 11:54 AM
First thing that I would check is that the frunk gasket is aligned and seated properly. I have had the same problem twice, & it was misalignment/seating of the gasket.

sduskin
03-12-2015, 01:23 PM
try wiggling your key. On hers, she heard a click then the frunk would close and latch properly.

Chupaca
03-12-2015, 01:36 PM
make sure the pin and lock line up and are tight. As mentioned if the gasket is off it will miss-align the latch. Your having to push the pin over to catch. Not much else involved there....:thumbup:

Big Mike
03-12-2015, 01:43 PM
having the same problem. Taking it to dealer today. Will let you know the result.

2dogs
03-12-2015, 01:44 PM
Help. My 14 rts frunk does not close gently. I sometimes have to close it several times by tapping the frunk hard onto the latch. Am i doing something wrong or is it a loose latch?

It's in the key frunk/seat release mechanism. Gently pop the seat and then remove the key. Then both the frunk and seat should close easily. Problem is the frunk release is out of adjustment. :mad: :banghead: :gaah: Popping the seat open and removing the key should center the mechanism so both should close easily........maybe. It works for me.........most of the time anyway. :thumbup: Good luck. :pray:

ARtraveler
03-12-2015, 02:04 PM
All advice above is on the money. An easy fix, but an annoying thing to happen. :thumbup:

krafael5
03-13-2015, 04:41 PM
Thanks everybody for your help. I will definitely try all the advice given. Again, thanks for your time.

maliamd
03-13-2015, 04:44 PM
Same issue with my frunk. Misaligned.

finless
03-13-2015, 06:59 PM
http://www.youtube.com/watch?v=ph43Jirr3Eo

OwnerOfHarriet
03-14-2015, 05:34 PM
check to make sure that the wire connector by the frunk latch -- it can hold up the lid from shutting correctly