Locked keys in frunk

[smporter420]

Sent from my SCH-R950 using Tapatalk 2

How do you open frunk without keys

[johnnyg]

Take the left side cover off an you can stick your hand up were the cable locks the lid an pull on the latch to get it to open. It's hard but that's the way I had to open mine. ST Hope this helps.:thumbup:

[Chupaca]

being an RSS you could reach the cable pulling the oil access panel. Then I carry two keys. One in my pocket and one around my neck. To easy to put one in your coat pocket then put the coat in the frunk...:thumbup:

[Dragonrider]

I keep a non-chipped key under the lining of the glove box.

[ChasCS]

If you buy a decent key chain, you will never lock your keys in there again...

Something like these... ;-)

http://www.guntwo.com/Biker-Big-Skull-Key-Chain-Ring-Holder-SK12-061-for-men
You are a man right?

Chas

[bradyb6599]

I went to my local locksmith and had a non chip key made ( Chrysler ) and put yhr key part in the foam and then duck taped the top to the right inside part of the the side panel just what I did and key I got if you need size of key ( key code) to order from locksmith pm me and ill give it to you
Good luck
Brady

[Bob Denman]

Duct Tape is good... :thumbup:
But it won't last forever! :shocked:
You might want to consider something a bit more permanent...

[BLUEKNIGHT911]

Duct Tape is good... :thumbup:
But it won't last forever! :shocked:
You might want to consider something a bit more permanent...
:lecturef_smilie: :gaah:.....Bob, if it's " PERMANENT "....then you won't be able to get it off to use it either :dontknow: :roflblack: :roflblack: :roflblack: :roflblack: :roflblack:....Mikeguyver :thumbup:

[smporter420]

Popped panel off and no way I can reach it. FML

Sent from my SCH-R950 using Tapatalk 2

[robmorg]

I keep a non-chipped key under the lining of the glove box.That's an excellent idea! :thumbup: I think I'll do the same (which will probably insure that I'll never need it :sour: ).

[SpyderBandit]

If you buy a decent key chain, you will never lock your keys in there again...

Something like these... ;-)

http://www.guntwo.com/Biker-Big-Skull-Key-Chain-Ring-Holder-SK12-061-for-men
You are a man right?

ChasIf I bought a key ring like that, I'd have to buy an F3 to go with it.:thumbup:

[IdahoMtnSpyder]

Popped panel off and no way I can reach it. FML

Sent from my SCH-R950 using Tapatalk 2
Did you see my PM with a link to pics of how to open the frunk lid with a rod?

[lwrydr]

I went to my local locksmith and had a non chip key made ( Chrysler ) and put yhr key part in the foam and then duck taped the top to the right inside part of the the side panel just what I did and key I got if you need size of key ( key code) to order from locksmith pm me and ill give it to you
Good luck
Brady


I sent (tried to send) you a pm for the key code....did you get it?

[smporter420]

Did you see my PM with a link to pics of how to open the frunk lid with a rod?

The locking mechanism design is different on the 12 RSS. Wouldn't work with that year/model. Helpful tip though for ST owners. :thumbup:

[smporter420]

Removed the upper side panel and ever so lightly tugged on the cable and BAM the frunk opened right up. Thanks Lamont for the tip. :yes::yes::yes:

[billybovine]

I keep a non-chipped key under the lining of the glove box.

What about if you decide to lock the handlebars and the glove box locks with it????

[ChasCS]

If I bought a key ring like that, I'd have to buy an F3 to go with it.:thumbup:

They have many designs, several to suit your fancy, or choice.


I still need to upgrade my dog chain collar...

Chas

[smporter420]

15

Sent from my SCH-R950 using Tapatalk 2

[Papa Jim]

I put my ISP key in the helmet not thinking and put in the frunk,had to call a locksmith to pic the lock.....since then had 2 key blanks made I bought ILCO X270 had to purchase a pack of 10 on Amazon. They work great to unlock but not to start. Anyone want one have 6 left @ 2.00 each. Send me PM for address...I have 2012 RTS by the way

[JCSMOKE]

I used a choke cable for a small engine and placed the end under the left side oil panel the other end is secured to the locking mechanism. I often place both keys in the frunk when I am at an event or someplace I want the bike locked up. I get done with what I am doing, pop the panel off, pull the choke cable and the frank pops up. Now this is just between you and I right?:shocked:

[LV2RYDE]

Removed the upper side panel and ever so lightly tugged on the cable and BAM the frunk opened right up. Thanks Lamont for the tip. :yes::yes::yes:

Please, can you take picture of how you did it for ST?
thanks in advance :bowdown::bowdown::bowdown:

[Purple Guy]

I keep a non-chipped key under the lining of the glove box.

I also have a non-chipped key on the bike.
I hung mine behind the left access panel.

[Bob Denman]

The glovebox on the RTs is not readily apparent to onlookers... I've kept a "Dummy" key in there for several years....


...never lost anything yet! :thumbup: :D

[Purple Guy]

The glovebox on the RTs is not readily apparent to onlookers... I've kept a "Dummy" key in there for several years....


...never lost anything yet! :thumbup: :D

I had thought of putting it in there but I do have a habit of locking the steering/glovebox so if in need the key wouldn't be accessible...

[SpyderLady]

You can get an extra key made and put it in one of those key boxes that are magnetic and put it on the frame underneath, on the top side. It will not come off and then you always have a spare key.... :yes::yes:

[bradyb6599]

Ilco brand key # x270 tmc1. Was the key I got if you want a picture of how I mounted it in my bike shoot me your email and ill get it ti you also