cat delete and re assemble

[cuznjohn]

93604936029360593603

[Bob Denman]

:shocked: And... :dontknow:
How does it SOUND??? :D

[cuznjohn]

not started it yet, need help with one spring and my friend is out on his bike, will let you know later

[Bob Denman]

:D Cool...:thumbup:
:congrats: on the progress so far! :clap:

[Chupaca]

looks like things went well. Best spring tool is some nylon twine slipped on the hook end of the spring, taking both ends and wrapping it around the handle of your choice (screwdriver, broom handle, wrench etc) never fails. Should sound good....congrats..:2thumbs:

[claychaser]

looks like things went well. Best spring tool is some nylon twine slipped on the hook end of the spring, taking both ends and wrapping it around the handle of your choice (screwdriver, broom handle, wrench etc) never fails. Should sound good....congrats..:2thumbs:

Great idea, why didn't I think of this!!! Or, I'm thinkin a zip tie, size of your choice, could do it as well. Thanks!

[cuznjohn]

i started it and it is much louder with the stock can. we had to find another spring to get on the top because it was almost impossible to get that top :cus: in. bob i don't think your misses would like the sound as a passenger. i am going up to Ron's on Sunday morning to have the shocks re-done and to get a oil change. i will be there around 8 to 830

[Bob Denman]

Sunday morning... http://smileys.smileycentral.com/cat/4/4_12_12.gif
The Missus and I were planning on taking a ride; let me see what I can work up for us! :thumbup:

[ulflyer]

The decell burbble is a regular feature.

[Deputy56]

I used an automotive headlight spring removal tool to get third spring, it is thin enough to fit in.

[Bob Denman]

Is it a question of the strenght of the Spring, or it's inaccessability? :dontknow:
From my sledding days; I ALWAYS keep a spring puller in the arsenal! :2thumbs:

[ulflyer]

Is it a question of the strenght of the Spring, or it's inaccessability? :dontknow:
From my sledding days; I ALWAYS keep a spring puller in the arsenal! :2thumbs:


Both. The spring is strong and its on the top side where its not much room for the hand. If you have a lift its much easier to get some leverage, and strong muscles are a plus.

I watched and "helped" by holding a flashlight while the tech did mine up on a lift. Several times the spring slipped as he didn't have a puller and popped back underneath somewhere and had to be fished out.

[BikerDoc]

I did not install myself but have the cat delete and akrapovic muffler with baffles out. The sound is fantastic . I drown out my buddy who has a two brothers All the two wheelers look my way now when I pass

[taxmyzer]

Great job John! Hope you like the extra sound. I'm heading up to New Paltz tomorrow to have rear tire changed. See you out at oak beach sometime.

[wis2013rtltd]

I did not install myself but have the cat delete and akrapovic muffler with baffles out. The sound is fantastic . I drown out my buddy who has a two brothers All the two wheelers look my way now when I pass
Video? That is the combo I want to hear.

[cuznjohn]

we couldn't get the top spring on so we found a lil softer spring and installed that, i am just getting home from ron's and have not measured the hight of the front end yet, but side to side the shocks that he removed and almost a inch shorter than the new ones they sent me, and the ride height does seem higher

[BikerDoc]

Video? That is the combo I want to hear.


http://youtu.be/bnJeYjJBQkw this u tube video doesn't do it justice since the beauty is in the downshifting sound but this is all i have for now..

[wis2013rtltd]

http://youtu.be/bnJeYjJBQkw this u tube video doesn't do it justice since the beauty is in the downshifting sound but this is all i have for now..



That is the combo I was waiting to hear.