Introducing the 2015 Can-Am Spyder F3!

[BRPcare]

Hi everyone,

We'd like to share a first official photo of the new Can-Am Spyder F3 here:

Introducing the 2015 Can-Am Spyder F3. New muscular design. Our boldest ride yet.
93549


We'll use this thread to share future info or photos as they become available.

[ARtraveler]

Taaaaaaaaaaaaaaaaaa Daaaaaaaaaaaaaaaaaaaaaaaaa! :2thumbs::2thumbs:

That is some nice looking iron. :clap:

[iSpyder]

Very different look. Interested in hearing about the specs. Does it have a windshield? Can't tell from the picture...thanks for posting!

[Kratos]

I love it. Is this an addition or an evolution?

[coz]

msrp, and hp ? i need to plan the next heist.:yikes: how can anybody not like how this bike looks?

[yamahog]

Interesting looking cant wait to see one up close.:popcorn::popcorn:

[Lamonster]

You know I'm digging it! :yes::2excited:

[billrob71]

A lot of very bold changes , like it a lot still unsure of the riding position and bars but a great next generation :cheers:

Thanks for the early revile Steve

[Ivorspyder]

Looks a cool ride.

[ChasCS]

Ok, hey that looks much better than the original paparazzi pics we all gawked at earlier this week.
VERY Nice looking machine. ;-)

Chas

[PrairieSpyder]

Thanks for making it official!!!

I like the riding position and the exposed engine; the front end not so much. Maybe when I see one for real it'll grow on me.

[ruthie]

I take it that it has the same engine as the 2014 RT has. very sporty looking.

[dndfindley]

Taaaaaaaaaaaaaaaaaa Daaaaaaaaaaaaaaaaaaaaaaaaa! :2thumbs::2thumbs:

That is some nice looking iron. :clap:

Subjective I know and my tastes are not your tastes and vice versa but this thing sucks big time. As long as it is an additional model I have no complaints...but if this is the wave of the future - so long BRP...and I am currently riding my second Spyder.

[StealthSpyder]

Hi Steve...thanks for the "official" pic haha. As you know we have all see plenty of pics of the F3 already. We want more info because all this post does is confirm the obvious that it was to be in the 2015 lineup and was called the F3.


:ani29: Engine?

:ani29: HP & Tq?

:ani29: New addition to the lineup or replacement of one of the 2014 models??

:ani29: MSRP?

[otter28169]

From that angle it looks good:thumbup:. I hope it does when I see one in person. I like the seating position, and would love to add another ride to the stable.

Just sayin'............

[Lamonster]

I can't wait to take my road trips with both Spyderpops and I on these Bad Boys :doorag::doorag:

[SpyderGirl]

As I've already said... I love this!! I can't wait to see/hear more and get a peek at the accessories available.

Oh, and I hope they come out with some bold new colors. Getting tired of white, black, and silver. Just saying.

[maliamd]

I like the look especially from the handlebars back and the exposed (no tupperware) areas. However, the bike seems out of balance with a heavy looking front end and an open back end. I would have liked to have seen a "lighter or more open" front end to blend better with the mid and rear sections.

[spydaman60]

I can't wait to take my road trips with both Spyderpops and I on these Bad Boys :doorag::doorag:this is a clue guys!! lamont isn't looking to take a ride with Harvey on any entry level engine!! just sayin---- right chad????

[otter28169]

As I've already said... I love this!! I can't wait to see/hear more and get a peek at the accessories available.

Oh, and I hope they come out with some bold new colors. Getting tired of white, black, and silver. Just saying.

Just sayin'............:2thumbs:

[billrob71]

I can't wait to take my road trips with both Spyderpops and I on these Bad Boys :doorag::doorag:

Who are you kidding you know there already one in the garage. That pic is probably your incognito pic :roflblack:

[Lamonster]

this is a clue guys!! lamont isn't looking to take a ride with Harvey on any entry level engine!! just sayin---- right chad????

Smart guy :doorag:

[Ultimate Seats]

We are all loving it here at Ultimate Seats! Can't wait to get one here and start R&D on a new line!

Thanks for sharing-

Dave

[bscrive]

BRP, will you be bringing one to SpyderQuest??????????

[Whitetail]

How much????? Please be under 20k

[BDR]

Ya...Ok Lamont. You just want to dismantle it ;-)

[Highwayman2013]

I like it, looks like it would be a blast to ride!

[flamingobabe]

BRP y'all hit a homerun here......I love it....it is HOT.....please allow me to test in the heat of the south ...we ride all winter....year round....this is going to bring in all new ryders.....accessories need to include beefy black rims....love the colored frame....can't wait to see...touch...ryde

[mindman]

WOAH BABY!!!! THAT LOOKS AWESOME!!!!!:clap:

[Chief-J]

I like it. Looks like it's ready to take on those Harley Haters. Will the RT have any changes to its look?

[CentralCoastCA]

I'm really intrigued and can't wait to try the F3 at the Long Beach Bike Show in December. Hope you have plenty of them to demo as I think they'll be pretty popular :D

[Ivorspyder]

I have a gut feeling that the 2015 RT is going to have a similar new look.I think this look is great.Much more motorcycle looking than any model so far.

[Bob Denman]

https://www.youtube.com/watch?v=arZdeg_fL-I

[Bob Denman]

Steve,
Can you please tell us when more information will be available on this new and exciting addition to the line-up? ;)

[PistonBlown]

I just want to know about the engine/power/0-60....sod the photos and give us some spec's:-)

[SPECTACUALR SPIDERMAN]

looks great, don't care, i love my rt-s.

[Laila's Dad]

I see some things I like and some I don't, but with any new product release, it is never truly designed for the current customer base. It is always tweaking, changing, inventing new things in order to bring in new customers(the fisherman casts his/her net outside of the boat not inside). Every event and marketing campaign normally is made for the first time buyer, on the fence buyer, or crossover buyer. I am sure they are hoping to maintain the current client base and get some of us to upgrade...again, but they seem to have met the true goal of bringing in a broader "fan" base. While I personally don't see an upgrade in the near future, as I am still in love with my 2012 RSS and have plenty of upgrades yet to do, I can't wait to see how some of you update the F3 when you get it. I have buddies that ride bikes, trikes, and of course reverse trikes and I have to say the reverse trike riders(Spyder riders) seem to be the most innovative with things to add. From wraps to home made cup holders, the Spyder crowd is on point.

[rnet]

Will this be to BRP as the Edsel was to Ford? Time will tell.

[FaranH]

Oh, yeah. I can already see myself on one. How about you? ;)

93556

[Princeau99]

Oh, yeah. I can already see myself on one. How about you? ;)

93556

Looks like you were one of the models.

[Bob Denman]

:agree:

EDIT: After looking more closely... :D

:lecturef_smilie: Clever girl... :thumbup:

[Topshotta]

Oh, yeah. I can already see myself on one. How about you? ;)

93556

Nice, looks like it was made for you!

[Lamonster]

Oh, yeah. I can already see myself on one. How about you? ;)

93556

I can see me and Spyderpops going to all the rallies on these Bad Boys...it's in my minds eye now. :doorag:

EDIT_ Did not pay attention to detail....it s was so good I didn't notice that was you on there. Nice job :thumbup::bowdown::firstplace:

[Bob Denman]

By the way...
How does that shorty muffler sound? ;)

[SpyderAnn01]

Looks a cool ride.

Let's hope so

[wyliec]

Grand Slam Home Run:thumbup:

[Bigtow]

Looking good.... Can't wait to see it ......:yes:

[Brogers57]

I'd love to test it in the VERY HUMID weather of Kentucky!

[Greg H.]

What I see....

HD V-Rod + Yamaha VMax + Spyder = Hot Rod Spyder

Very cool! Although; that front end is quite strange.
Will there be some touring variation? That's the only way, I would be interested. And; with that said, I wont be selling my RT-S for quite some time.

[reissooz]

As a current v-rod owner looking to move onto a Spyder, this is exactly what I've been looking forward (if it has the bigger engine, etc). I remember the first time I saw a v-rod 12 years ago, it was all I needed to see, I had to have one. This Spyder brings back those same emotions!! Absolutely hope this bike lives up to its appearance!

[Whitetail]

I think BRPs biggest mistake was trying to make the spyder too much like a snow mobile and not a motorcycle initially. This is where all tge heat issues have come from..they finally decided to build it like a motorcycle.

[Magdave]

I like it. Looks like it's ready to take on those Harley Haters. Will the RT have any changes to its look?

Look to the left.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/s480x480/10570475_753441214716507_3793098327691722296_n.jpg

[flaggerphil]

Is this going to take the place of the GS/RS or is it a new model with its own niche?

[Barlock]

Thanks for making it official!!!

I like the riding position and the exposed engine; the front end not so much. Maybe when I see one for real it'll grow on me.

That is my opinion as well.

[Jeffsm69]

Hi everyone,

We'd like to share a first official photo of the new Can-Am Spyder F3 here:

Introducing the 2015 Can-Am Spyder F3. New muscular design. Our boldest ride yet.
93549


We'll use this thread to share future info or photos as they become available.

Thanks for the announcement Steve, I'll reserve my opinion until the specs and price are released

[Colin]

Is this going to take the place of the GS/RS or is it a new model with its own niche?

New model, apparently

[Illinois Boy]

As I stated before, I like the new direction... without a doubt.

However, is it me or does the tail light unit look like an after-thought? It sticks-out from the fender in a peculiar way, which does not appeal to me.

So... I see an opportunity for the after-market-guys (and gals) to come up with a custom replacement.:thumbup:

[Web Runner]

Amazing!

[Chupaca]

so it's an F3...?? That means RS/RSS/ST/RT/F3...?? I'm good don't need the details just that one question...still love my RS...:2thumbs:

[wd8ajj]

Looks like an addition to the linage, being a new name

[Marker]

You know I'm digging it! :yes::2excited:

I am really loving this F3.:yes::firstplace:

BRP ,you are innovators ,way to go :bowdown::bowdown::firstplace:

[zamfield]

Doesn't look like a snow mobile anymore... more a Harley with a kawasaki ninja headlight with a whacking great frunk thrown on as an afterthought !!
:joke:

[3tracs]

It looks like a muscle car in Spyder clothing! Can't wait to see the specs and pricing information. Great job BRP!!

- 3Tracs

[spyderyderjim]

You know I'm digging it! :yes::2excited:

Hi Lamont,
I would think there will be a "Lamont cat-delete bypass pipe" put on while uncrating 2015 Spyder F3!!!!!
The muscle Ryde you (and many others) have been waiting for, awesome!!
Enjoy.
Jim

[cyclelover63]

I like the handle bars coming back farther for us shorter people...would like to see an rtf3...f3rt..f3 touring..:popcorn:

[Spyder601]

I would hope there would be a windshield option. I love the look of this bike. Really like the openness of the motor. Great job BRP

[4 MARIE]

Okay, splay-legged, forward peg, drag bars.... a three wheeled boss hoss. You all know Can Am cannot ignore the cruiser market forever. The nose kind of reminds me of an early 70's Camaro ? While not my cup of tea (the bike not the car), I'm sure they will sell a lot.

[codafranco]

9357593576935779357893579

[hdlongrod]

Well done BRP!!:firstplace:

[lil rabbit]

:agree: with everyone :congrats: BRP it looks awesome!!!!! :clap::clap:

[dndfindley]

Will this be to BRP as the Edsel was to Ford? Time will tell.

One can only hope that will be the case. That is one ugly machine and beyond that since looks are subjective - the thing will not handle with that seating position. For all you boulevard cruisers - this is your machine.

[3tracs]

One can only hope that will be the case. That is one ugly machine and beyond that since looks are subjective - the thing will not handle with that seating position. For all you boulevard cruisers - this is your machine.

It looks to me that there could be two riding positions... Notice what appears to be another set of pegs just behind the front set; obviously passenger pegs, but if the rider were to use them he would have a riding position more like the RS/RSS. Just an observation...

Sent from my Nexus 4 using Tapatalk

[pwpalmbay]

It looks like there is a partially exposed engine as well. Maybe the '15s won't have as many heat issues.

[Eagle1]

Great new aggressive look, less Tupperware, more open design. MORE PICTURES!! 🆒 ✌ 💀 🌟

[vtspyder]

That thing is muscular looking! The only thing that doesn't seem to fit with me is the handlebar tubing. Maybe a trapezoidal tube handlebar riser powdercoated black would be nice and fit the chiseled angles of the rest of the machine. A single rectangular box arm to hold the rear fender would be cool too. The round tubes just look too delicate compared to the rest of the machine. Well done BRP. When I get rid of the '10 that will be the next one. Only have about 24000 on the '10 so it's going to be quite a while. :-(

[vtspyder]

One can only hope that will be the case. That is one ugly machine and beyond that since looks are subjective - the thing will not handle with that seating position. For all you boulevard cruisers - this is your machine.

So true! Looks like I wouldn't be hang doggin' it in the twisties.

[Bob Denman]

Has anybody found anything on a BRP website, that contains more information about them yet? :dontknow:

[SPYMAN]

Can't wait to get my F3!!! Bad looking Machine!!!:doorag::doorag::doorag:

[Dochands]

My post?

[grumpybob]

Will it be more reliable than all the models that have been built so far???

[Bob Denman]

How good is your Crystal Ball?http://smileys.smileycentral.com/cat/36/36_5_6.gif

Mine either! :opps:

[ottawa-rider]

My guess is that we are not going to know much more about the specifications of that new F3 before that big reveal sometime in September.

Given all the spied photos that came out, BRP had no choice but to make it official, but they are not going to spoil all the fun.

[anthony422]

Tour Version ?

[Rayelljay]

Get rid of those forward cruiser pegs and put a set of decent handlebars so driver assumes a more leaned forward attitude and give it manual transmission and I might consider it. I wonder how long a rear tire will last on it.....meanwhile, my '11 RS SM runs like a top.

[Showie]

COOL!!

[flaggerphil]

The Spyder has a sport version (RS), sport touring version (ST), and pure touring version (RT). To me it looks like it will now have a cruiser version.

[ARtraveler]

Has anybody found anything on a BRP website, that contains more information about them yet? :dontknow:

As of yesterday PM, not only no--but heck no. They seem to be very late with their website. Remember how long it took them to get the "build a bike" up last year.

[Bob Denman]

You are correct..
But, my natural impatience has been acting up lately... :D

[JerryB]

Hi Bob.

Re: impatience has been acting up lately...

I understand that most pharmacies carry a product called Valium. You might consider trying it.

;)

Jerry Baumchen

PS) I have never needed it.

[billybovine]

BRP released new pic on facebook.
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10547484_10152641751893094_8276896286566352800_n.j pg?oh=ab8462bb45e22ef3008e81c82e0b52a9&oe=54814529&__gda__=1416150173_36c3b815aad904dac82afeba821b4ee 7

[billybovine]

Don't look like a lot of changes for RS, ST and RT

[MikeT]

Anybody besides me see some V-MAX design lines in this F3?
Mike

[MikeT]

Don't look like a lot of changes for RS, ST and RT
I hope BRP wouldn't mess too much with success, especially on the RT series. A few tweaks:
a. better tires
b. Zumo 590LM
c. New & wider range of colors
d. standard adjustable side wind deflectors & heated seat on the RTS & LTD
e. 1500/1800cc triple, now that the 1330 might "trickle down"
Mike

[tigerdr]

Don't look like a lot of changes for RS, ST and RT

Those Spyder are 2014 models.

RS, ST AND RT will be unveil on september 23.

[Bob Denman]

:agree: :D

[ARtraveler]

Anybody besides me see some V-MAX design lines in this F3?
Mike

The ram air scoops for sure.

[scottnkansas]

It's a thing of beauty!


Scott

[Deanna777]

Look to the left.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/s480x480/10570475_753441214716507_3793098327691722296_n.jpg
I saw the same thing in the other pic's on this website. Deanna777

[Deanna777]

Look to the left.

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/s480x480/10570475_753441214716507_3793098327691722296_n.jpg The F3 is behind a Can-Am RT, I saw this when I looked at the photo's. Deanna

[Deanna777]

BRP: Where did the name F3 come from?

Will there be an F1, or F2 in the future?

Since their is an F3.

Deanna777

[S&L]

Subjective I know and my tastes are not your tastes and vice versa but this thing sucks big time. As long as it is an additional model I have no complaints...but if this is the wave of the future - so long BRP...and I am currently riding my second Spyder.


All I can say is we're REALLY glad we got the 2014!
The front end looks like a Dodge pickup.

We love our new RT Limited!!!

[r1100rider]

All I can say is we're REALLY glad we got the 2014!
The front end looks like a Dodge pickup.

We love our new RT Limited!!!
I find all this front end complaining funny the last months have been nothing but whining about the heat issues and threats to sue and turn brp into the nhtsa over fires and all , so they do the obvious thing and move the radiators away from the foot area and open up the front for more air flow and all some can do is bitch about the styling , your choice heat or open air front and sides

[The-BigDog-30]

Will it be more reliable than all the models that have been built so far???

Heck no, they (BRP) should be working to correct and perfect the current models before releasing more problems.

[Bob Denman]

BRP: Where did the name F3 come from?

"Fait Accompli: 3rd version"? :dontknow:

[Lamonster]

F3= Freedom. 3

[Bob Denman]

This could start a whole new contest... :D :thumbup:

"Why DID they name it that?" :D

[StealthSpyder]

F3= Freedom. 3

Are you guessing like the rest of us or do you know that to be true

[OldDog]

This could start a whole new contest... :D :thumbup:

"Why DID they name it that?" :D


F3 = Fuel injected inline 3:spyder2:

[Bob Denman]

Ohh... Let's play the game! :2thumbs:
What do YOU think it stands for? :D :thumbup:

[wyliec]

Formula 3 (open wheel formula racing).

[bscrive]

F3 = Fuel injected inline 3:spyder2:



You are close but I believe it goes back to their snowmobile line.


It stands for Formula 3. They just condensed it. The 3 does stand for 3 cylinders. It did on the sleds.

The formula line of snowmobiles go back to the early 80's. They are a snowmobile company at heart you know.

[Bob Denman]

93663 They were pretty decent sleds for the day... :thumbup:
I was at the Shoot-Out in Booneville when they were introduced. 126 horsepower right out of the box... :shocked:
Then; they let the "experts" tinker with it a bit...
and they blew it up! :yikes:
(The temperatures dropped about 15 degrees between the first, and second set of runs... :D)

[dndfindley]

Can't wait to get my F3!!! Bad looking Machine!!!:doorag::doorag::doorag:

As to the latter part of your comment - literally.

[StealthSpyder]

As to the latter part of your comment - literally.

Definitely agree. However, as long as it is a new model in addition to the current models, I'm all for it! I see nothing negative coming of it as long as it is a new model that has zero implications on the RS/RSS sport models.

Hopefully someday the RSS will come with about 150+HP and have an 11+ inch wide rear tire for max traction to harness all the power.

[spydermyke990]

A spyder cruiser..... I like it...... I'll give a couple of years before I'm ready to trade in, and they get any bugs worked out.... Besides I didn't get as many miles in on my sts as I had planned this year, too many things on my plate, and it's been a crazy year. Not that I had any problems with my machine, just others things taking up a lot of my time.

[chris56]

I would say in this riding Position you should be able to be faster in the corners than an RSS !!
seems they have a new designerteam from Italy ?? - but it will be hard to get one for next year (sold-out ??)
so I need only a backrest for my Girl & some changes on the front (like always..)

[Shewhoprays]

Can't wait to test ryde one but no. t sure it would be as comforfable to ryde across country on like an RT. Guess it depends on the seat

[Colin]

Not trying to be negative, and it hasn't put me off the F3, but they seem to have done a similar thing to the F3 as they did to
the ST.
ST= a new model style of Spyder, but on the ST SM5 the still put the same type of bumper on as the original RS/GS

F3= New Model but they appear to be using almost the same front turn signal as the original RS/GS

Im starting to wonder if they have Warehouses full of these components?

Just an observation, and I still want to try one :D

[spydaman60]

f 3 = "fast three" wheels!

[pauly1]

Lot's have asked for a "touring" version": you already have it in the RT. I'll bet money this is a naked version of the basic RT chassis with a few pieces of well placed plastic for aesthetics and function. Probably shed a bunch of weight although it will still weigh more than the RS/ST models.

Wayne

[Bob Denman]

Not trying to be negative, and it hasn't put me off the F3, but they seem to have done a similar thing to the F3 as they did to
the ST.
ST= a new model style of Spyder, but on the ST SM5 the still put the same type of bumper on as the original RS/GS

F3= New Model but they appear to be using almost the same front turn signal as the original RS/GS

Im starting to wonder if they have Warehouses full of these components?

Just an observation, and I still want to try one :D

"Parts Commonality", is the name of the game... BRP ain't the only one playing it either! :D

[den1953]

I'm wondering if BRP will come out with a version with windshield and detachable bags in a similar manner to what the ST Limited is to the the ST. The F3 looks like the perfect platform for that sort of thing.

[Kratos]

I'm wondering if BRP will come out with a version with windshield and detachable bags in a similar manner to what the ST Limited is to the the ST. The F3 looks like the perfect platform for that sort of thing.

I'm already trying to find ways that this doesn't make the ST useless as it is, add some saddlebags and a windshield, and I know most definitely the ST line won't make sense anymore.

[JkRbbt]

I'm wondering if BRP will come out with a version with windshield and detachable bags in a similar manner to what the ST Limited is to the the ST. The F3 looks like the perfect platform for that sort of thing.

CORBIN, are you listening???? Sleek top loaders?? :thumbup:

[Dan_Ashley]

"Parts Commonality", is the name of the game... BRP ain't the only one playing it either! :D
Ever see a Mazda pick up sitting next to a Ford Ranger? Or a Chrysler next to a Mercedes. Look under the hood of a Hummer and you will find a Chevy Silvarado. What about the Lexus and the Toyota? Lots of common components there.

[Colin]

Ever see a Mazda pick up sitting next to a Ford Ranger? Or a Chrysler next to a Mercedes. Look under the hood of a Hummer and you will find a Chevy Silvarado. What about the Lexus and the Toyota? Lots of common components there.

I don't disagree with you, but how many of those vehicles have, in essence the same parts on this years model that was on a 2007 model?