PDA

View Full Version : Front truck weather stripping keep coming lose



ruthie
06-19-2014, 02:41 PM
Front truck weather stripping keep coming lose, any body else having this problem? Has anyone has a fix for this problem

Jim&Teresa
06-19-2014, 02:45 PM
On my 2012 RT, I had the issue more than my current 2014 RT. On the 2012 RT, I used double stick tape around the perimeter where it was coming loose. Did not go around the whole perimeter, but place it strategically around trouble areas -- if I remember right, it was around the top edges and sides near the top..... Good to check to see if it's on correctly in case your frunk lid is hard to open/close.

Good luck! :thumbup:

Chupaca
06-19-2014, 03:57 PM
put some silicon around the area coming loose. Some times some WD40 aroud the seal to keep it from sticking to the lid...:thumbup:

Bob Denman
06-19-2014, 05:39 PM
With some REAL careful masking and spraying; a bit of headliner adhesive should work nicely! :thumbup:

Dan_Ashley
06-19-2014, 05:41 PM
put some silicon around the area coming loose. Some times some WD40 aroud the seal to keep it from sticking to the lid...:thumbup:
This is what I did. I used about five "dabs" here and there.