View Full Version : Trailer plug question
tankguy
05-28-2014, 03:06 PM
I am just trying to finish off a trailer project for my 2012 RT S and have a question. I have received the Big Bike wire harness for the RT and I would like to install a flat 4 receptacle, but there are five wires on the end. :banghead: The wire colors are red,green, brown, blue and orange. How do you wire up a flat 4 plug and which wires get doubled up? The wires on the trailer are green, yellow, brown(2) and white.
Flamewinger
05-28-2014, 06:46 PM
You might try the RT Shop talk. This is the ST shop talk so we might not know the answer.
DRTSB
05-28-2014, 06:59 PM
The Red wire is not used, just tape it off
Dave ;)
RD2-BBP
05-29-2014, 08:42 AM
You need to go to the auto parts store and get a 5 to 4 wire converter.
edmarino
05-29-2014, 08:55 AM
I don't know about taping off the red led, I do know you need a 5 to 4 converter
Major spyder
05-29-2014, 09:29 AM
I matched mine color to color and it worked fine.....
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.