Highway Pegs

[Questions]

I have a 2009 RSM so I'm looking for some of the best highway pegs available and I have Ricvo floor boards. I need to get my left foot away from the heat. I appreciate all the help you guys can give me.
thanks satchmo60 :spyder2:

[Yazz]

I have a 2009 RSM so I'm looking for some of the best highway pegs available and I have Ricvo floor boards. I need to get my left foot away from the heat. I appreciate all the help you guys can give me.
thanks satchmo60 :spyder2:

Have you checked your exhaust Y gaskets? It can get hot when they burn out.

Replace them with Honda PN 18392-MAM-000.

[SPYD3R]

MAKE YOUR OWN.....
88452 88451
LEFT RIGHT

i used 3/4" box tube to go from side-to-side, 3/4 X 1/2 for the 'uprights'... bought a set of RS read pegs... a couple 'pins', paint, weld, etc etc etc... and these are absolutely fantastic.... strong as an Ox, and twice as pretty....
Dan P
Easley, SC
SPYD3R

[Cruzr Joe]

Not sure if Lamont makes them for the RS but the ones he makes for the RT are Awesome

Cruzr Joe

[Slagiatt]

I have Rivco floorboards/heel-toe-shifter and highway pegs ('09 GS). The highway pegs I got use the Rivco brackets and their "Flatfoot" Wide Pegs (#PEGSW). They look great and bring my feet up and out. To stretch out, I simply lay the back of my boots over them and can completely straighten out my legs. Works great for me.
Hope this helps.

[KX5062]

I had the Rivco's on my 08 GS and liked them very much. They did make servicing a little more challenging, but otherwise were a good product. :thumbup: