Anyone fitted BRP footboards to a base 2014 RT?

[Nito]

As above,

Has anyone fitted the RT-S or RTL footboards to the base 2014 RT. If so, is it literally just the footboards and rubbers that's required, or are additional brackets/bolts needed?

I'm hoping its a case of remove the pegs and use the same fixings into the boards. Apparently the side castings etc changed in 2013 so the RTS and RTL footboards from a 2014 should be retro fittable to all 2013 model RT's also.

Thanks
Nito

[bullant12]

As above,

Has anyone fitted the RT-S or RTL footboards to the base 2014 RT. If so, is it literally just the footboards and rubbers that's required, or are additional brackets/bolts needed?

I'm hoping its a case of remove the pegs and use the same fixings into the boards. Apparently the side castings etc changed in 2013 so the RTS and RTL footboards from a 2014 should be retro fittable to all 2013 model RT's also.

Thanks
Nito

If you have an SE6 (Semi auto), I don't think it should be a problem. But if you have an SM6 (foot shifter), it will not work because BRP did not accommodate the OEM floorboard for them.

[Nito]

Thanks, it would be for an SE6. I know they will fit, it's a case of what components will be required to fit them. ie just boards and rubbers, or is there associated bracketry and fixings?

Cheers
Nito

[Magdave]

IMHO there are plenty of aftermarket FB's that are superior to BRP's especially Seal's. If have read many complaints about the BRP boards and few about Seals. Food for thought. :thumbup:

[Nito]

The Seals do indeed look good. But they don't seem to list one for the SE6 2014 model.

Also the BRP in black are reasonably priced, like £400 but that is purely the board and the rubber inlay. Hence why I'm wondering if any other parts are needed.

Also, to run an ipod with the Audio, do I need anything extra or is there already a USB ready input.

Thanks
Nito

[spyder4335]

Regarding the Seal floorboards. Yes, the SE5 DLX model does fit the 2014 RT SE6. I confirmed it with John at Seal. I'm expecting mine this afternoon.


Sent via Tapatalk on my iPad.

Timeless Black 2014 RT SE6

[Magdave]

Regarding the Seal floorboards. Yes, the SE5 DLX model does fit the 2014 RT SE6. I confirmed it with John at Seal. I'm expecting mine this afternoon.


Sent via Tapatalk on my iPad.

Timeless Black 2014 RT SE6

2013 frame is the same as 2014 :thumbup: As far as that goes I believe all year RT foot pegs are the same and the Seals are all the same except SM vs SE. Someone can correct me if I am wrong.