PDA

View Full Version : Yoshimura vs Micron


Lamonster
08-27-2008, 11:52 AM
Got the Tri-Oval Yoshi pipe on and it looks pretty good. :thumbup: My son really liked the looks. :doorag:

If you're looking for a pipe that won't bug your neighbors this might be it. With the baffle in it sounds good but not near as loud as the Micron. With the baffle out it sounds better (to me) but still not as loud as the Micron.

You can get these from Evan at www.NoMagicNeon.com (http://www.NoMagicNeon.com)

YouTube- Broadcast Yourself.

http://image1.frappr.com/pix1/i/20080827/8/8/f/88f116bb3e91dccbb9f442395b92da0b0_large.jpg
http://image1.frappr.com/pix1/i/20080827/8/8/e/88e1a44b2c54073d33fefebcfca0b0080_large.jpg

http://image1.frappr.com/pix1/i/20080827/9/e/8/9e8e82eeb17313bcf31f1492a208fe0c0_large.jpg
http://image1.frappr.com/pix1/i/20080827/8/6/f/86f1e0786f9a030d78b7e00581f4adaf0_large.jpg
Lamonster
08-27-2008, 01:14 PM
Looks like I'll have a Spyder with a Hindel here in about an hour so I'll take a video of it too. :doorag:
bjt
08-27-2008, 02:26 PM
You keep going with other aftermarket exhausts and I am thinking about going back to stock. :dontknow:

There may be a used Hindle for sale within the next month or two. :)
LaughingHeart
08-27-2008, 02:46 PM
Does the new exhaust help with mileage at all? Other than sound, what does it do for the Spyder?
Lamonster
08-27-2008, 02:58 PM
Does the new exhaust help with mileage at all? Other than sound, what does it do for the Spyder?

:dontknow: It hasn't been out of my driveway yet. I do know that my Spyder ran a little cooler when I went to the Micron.
zzneonzz
08-27-2008, 03:34 PM
You keep going with other aftermarket exhausts and I am thinking about going back to stock. :dontknow:

There may be a used Hindle for sale within the next month or two. :)

Let me know when you are going to sell this i might be intersted :D
jedd
08-27-2008, 03:55 PM
Nice evaluation lamonster, only thing you sure you want that emblem on the pipe on your spyder;) I do like the sound of the pipe though I prefer the sound of the brand name Micron better ;);) By the way I see you have Corbin seat, only question will it help a sore tailbone in your opinion.
AMTJIM
08-27-2008, 07:28 PM
I need a new job...2 spyders and a hotrodded val.
Lamonster
08-27-2008, 07:31 PM
Nice evaluation lamonster, only thing you sure you want that emblem on the pipe on your spyder;) I do like the sound of the pipe though I prefer the sound of the brand name Micron better ;);) By the way I see you have Corbin seat, only question will it help a sore tailbone in your opinion.

My tailbone was broke back in my dirtbike days and I still have some issues with it but the Corbin works fine but the stock wasn't that bad for me either.

I do like the looks and having a backrest with those risers. Only problem I have is I seem to slide forward a little more than I like. That leather is pretty slick.
Rando
08-27-2008, 08:02 PM
Lamonster, after your long trip, did you swap out the 4" riser for the 3" or are you sticking with the 4"?
Lamonster
08-27-2008, 08:21 PM
Lamonster, after your long trip, did you swap out the 4" riser for the 3" or are you sticking with the 4"?

Got very use to the 4" so I'll stick with them for now. :doorag:
Sopher
09-14-2008, 09:03 PM
Lamont,
Did you have to get a special 90degree elbow for the Yoshi? Or did you weld the small loops on the bare NMN 90-elbow?
Lamonster
09-14-2008, 09:07 PM
Lamont,
Did you have to get a special 90degree elbow for the Yoshi? Or did you weld the small loops on the bare NMN 90-elbow?

MM has 90's with the loops on them now. :doorag:
Magic Man
09-14-2008, 09:08 PM
Lamont,
Did you have to get a special 90degree elbow for the Yoshi? Or did you weld the small loops on the bare NMN 90-elbow?

There is a "Spring Type" exhaust elbow we make for these kinds of pipes.

Lamonster is using one of these now with his Yosh muffler.

MM
Sopher
09-14-2008, 09:33 PM
Know anyone that would want to buy my Micron & 90elbow so that I can get the Yoshi and spring type 90elbow?
baldev
09-15-2008, 04:21 PM
Know anyone that would want to buy my Micron & 90elbow so that I can get the Yoshi and spring type 90elbow?


What color is it and how much do you want for a very used nobody wants Micron

http://smileys.smileycentral.com/cat/39/39_7_2.gif (http://www.smileycentral.com/?partner=_undefined)
Sopher
09-15-2008, 10:01 PM
What color is it and how much do you want for a very used nobody wants Micron



:joke:Yeah funny. I've been running the stock muffler. The micron color is silver to black.
baldev
09-16-2008, 04:45 PM
:joke:Yeah funny. I've been running the stock muffler. The micron color is silver to black.

Lil bit of humourhttp://smileys.smileycentral.com/cat/8/8_4_128.gif (http://www.smileycentral.com/?partner=_undefined) PM me on price/delivery and if I need to get elbow etc for the Spydie.