View Full Version : Rt backrest
dtkennney
03-17-2014, 09:07 AM
I had the RT BACKREST. installed. I ave noticed that it is difficult to put on or take off. Also when I put it on it wrinkles the leather around the mount. Is this normal.
Appreciate tee your input.
Cruzr Joe
03-17-2014, 09:16 AM
I had the RT BACKREST. installed. I ave noticed that it is difficult to put on or take off. Also when I put it on it wrinkles the leather around the mount. Is this normal.
Appreciate tee your input.
I don't have one yet but my understanding is that if it wrinkles the seat and is hard to get in and out then you have the wrong one. They make one for the stock seat and one for the "Comfort" seat (even though they refer to the stock seat as a comfort seat it is not "The Comfort" seat.)
Cruzr Joe
stevedfive
03-17-2014, 09:32 AM
http://www.spyderlovers.com/forums/showthread.php?64219-14-backrest-came-in-but&highlight=Wrong+backrest
Cruzr Joe
03-17-2014, 09:38 AM
Here is the seat guide.
http://www.spyderlovers.com/forums/attachment.php?attachmentid=84354&d=1394120244
Cruzr Joe
ARtraveler
03-17-2014, 01:52 PM
It sounds like you may have received the wrong part. Seems easy to happen with 8 separate units out there.
BikerDoc
03-17-2014, 02:43 PM
I had the RT BACKREST. installed. I ave noticed that it is difficult to put on or take off. Also when I put it on it wrinkles the leather around the mount. Is this normal.
Appreciate tee your input. I saw the same experience when the dealer installed the mounting bracket backwards on one. once they reversed the bracket to correct position the seat wrinkling went away
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.