New SpyderLover sponsor- JT's Machine Shop

[Lamonster]

Please welcome John from JT's Machine Shop :doorag:
http://www.spyderlovers.com/sponsors/jt.jpg (http://gnipsel.com/spyderstore/)

[Bob Denman]

Hey!! :2thumbs:
Glad to see that you made "The BIG jump!" :clap:
Welcome to the Party; is this why you've been so quiet in the recent Months? :D

[Big Arm]

:congrats: :clap:

[Gray Ghost]

Welcome.

[jthornton]

Hey!! :2thumbs:
Glad to see that you made "The BIG jump!" :clap:
Welcome to the Party; is this why you've been so quiet in the recent Months? :D

Ha, been snowed in and internet has been spotty...

JT

[GloryRyders]

:welcome: as our newest sponsor..................may it be a profitable decision for you!:yes:

[SteveMac]

:congrats: !!!

I will have to ride over and watch you work sometime soon! :thumbup:

[Jackspyder]

Ha, been snowed in and internet has been spotty...

JT
:congrats:
Sent an email through the website. Hope it gets to you.

[rays hell]

Welcome aboard it..

[mindman]

Welcome!

[ARtraveler]

:welcome:

[Barlock]

Welocome and ... I like the website!

[Maxson]

:welcome::clap:

[jwulf74]

Congrats.

I'm watching that trailer hitch fender... Though I will probably find a way to use it without the hitch. If a guy could rig it to mount off the 4 license plate bolts...

[jthornton]

:welcome: as our newest sponsor..................may it be a profitable decision for you!:yes:

I hope to at least break even :)

JT

[jthornton]

:congrats:
Sent an email through the website. Hope it gets to you.

Is this Don or Jack or Larry? I got 3 emails yesterday from SpyderLovers.

JT

[jthornton]

:congrats: !!!

I will have to ride over and watch you work sometime soon! :thumbup:

Come on over anytime. Well you might want to call first to make sure I'm in the shop. Currently trying to figure out how to trike this...and before I can even play with her I have to bust a track apart and fix the idler.

8352483525
Some of the things that have been keeping me busy during the winter.

JT

[Jackspyder]

Is this Don or Jack or Larry? I got 3 emails yesterday from SpyderLovers.

JT

This is Jack. I can probably drive down too. I'm not too far. Maybe you can give me some ideas for mods. :thumbup:

[arntufun]

I hope to at least break even :)

JT


Are you sure about that????????? :shocked: Both your trailer hitch fenders and your cat bypass have a price of $0.00 on your website.

I think I will place an order for a hundred of each before you can change the price. :roflblack: BTW... :congrats:

[scooterexpress]

welcome..

[Tango]

:congrats::welcome:

[SpyderAnn01]

:welcome:

[jthornton]

This is Jack. I can probably drive down too. I'm not too far. Maybe you can give me some ideas for mods. :thumbup:

Come on down, the more the merrier. I do live 0.6 miles down a chat (crushed limestone) road and right now I won't take a bike out until it dries up from all the snow, ice, freeze/thaw we have had in the last few weeks. The road does get better each day and I can't wait to get out.

JT

[jthornton]

Are you sure about that????????? :shocked: Both your trailer hitch fenders and your cat bypass have a price of $0.00 on your website.

I think I will place an order for a hundred of each before you can change the price. :roflblack: BTW... :congrats:

I don't put a price till I'm ready to sell them... nor do I allow pre-orders. I'm just that way, if I don't have it ready to ship the store won't let you order. I will put anyone first in line that asks me too for something that I'm out of stock on. The worst thing in my book is to order something then wait for weeks for it to arrive. I try and ship the same day or at the latest the next day. And shipping is always free!

JT

[jthornton]

Thanks for all the Welcome's that means a lot to me.

JT

[lookerjdc]

Welcome

the dash mount bar looks very interesting......

[Dan McNally]

:congrats: . . . hope you get rich . . . :thumbup:

[jthornton]

Welcome

the dash mount bar looks very interesting......

Thanks, they were quite fun to develop and perfect. I use an X Ram mount to hold my eye phone and a coil cord to plug it into my USB plug on the dash.

83563

Here is a funny video of me cutting one out on my plasma cutter.


http://youtu.be/_RIJpY3ths8

Wouldn't you know the one time I video cutting these on my plasma cutter and I get a tip up as a reminder not to rapid across the cut part.

JT

[taxmyzer]

Welcome! look forward to seeing pictures of cat bypass.

[jthornton]

:congrats: . . . hope you get rich . . . :thumbup:

Thanks, the only riches I hope to get is being friends with fellow SpyderLovers.

JT

[jwulf74]

Just saw that you added an air filter. I can't wait to see the price! Now we have an option against the other one. I want to get one but the cost of the current one seems steep and the stories about having to wait forever to get it put me off a bit.

[jthornton]

Just saw that you added an air filter. I can't wait to see the price! Now we have an option against the other one. I want to get one but the cost of the current one seems steep and the stories about having to wait forever to get it put me off a bit.

I hope to have the price worked out soon and will work hard to keep them in stock at all times. The first batch may go quick... if anyone want's to me notified by email as soon as I have them in stock just let me know.

JT

[AbNormy]

Congrats!


Living the dream while I still can!

[bandwagon]

Please welcome John from JT's Machine Shop :doorag:
http://www.spyderlovers.com/sponsors/jt.jpg (http://gnipsel.com/spyderstore/)


I have already made my first purchase.

[jthornton]

I have already made my first purchase.

Thank you very much. I've been mailing out Dual Fills (http://gnipsel.com/spyderstore/index.php?route=product/category&path=25), Dash Mounts (http://gnipsel.com/spyderstore/index.php?route=product/category&path=63), and Dash Power (http://gnipsel.com/spyderstore/index.php?route=product/category&path=20) units like I never could imagine. The lady at the Post Office just grabs a handful of flat rate boxes and hands them to me now when I show up.

I wasn't expecting the volume on the Dual Fills and will have the DF-1 back in stock Tuesday.

Thanks so much for your business.
JT

[Dan McNally]

Thank you very much. I've been mailing out Dual Fills (http://gnipsel.com/spyderstore/index.php?route=product/category&path=25), Dash Mounts (http://gnipsel.com/spyderstore/index.php?route=product/category&path=63), and Dash Power (http://gnipsel.com/spyderstore/index.php?route=product/category&path=20) units like I never could imagine. The lady at the Post Office just grabs a handful of flat rate boxes and hands them to me now when I show up.

I wasn't expecting the volume on the Dual Fills and will have the DF-1 back in stock Tuesday.

Thanks so much for your business.
JT

The dual fill is a no brainer . . . and whenever I show it to people, they think it is awesome. It is the ONLY way to adjust pressure on a Spyder's front wheels!

[jthornton]

The dual fill is a no brainer . . . and whenever I show it to people, they think it is awesome. It is the ONLY way to adjust pressure on a Spyder's front wheels!

Dan,

Thanks for your support, the dual fill was quite a struggle to find just the right lock on chuck to make it work like I expected it to work.

JT

[StanProff]

Ha, been snowed in and internet has been spotty...

JT

Welcome JT !! Good to have you as a sponser.:2thumbs:

[jthornton]

Welcome JT !! Good to have you as a sponser.:2thumbs:

Thanks Stan, good to be at this level finally.

Btw, I always liked the matching stripes you have on the RT and the 622.

JT

[cptjam]

Thanks, the only riches I hope to get is being friends with fellow SpyderLovers.

JT
welcome! It is all about the fellowship!

[jthornton]

welcome! It is all about the fellowship!

Thanks Joe

JT

[jthornton]

The DF-1 Dual Fill (http://gnipsel.com/spyderstore/index.php?route=product/product&path=25&product_id=51) will be in stock Monday, sorry for the delay one component got delayed in shipping to me. The DF-2 Dual Fill (http://gnipsel.com/spyderstore/index.php?route=product/product&path=25&product_id=64) with Gauge is in stock.

Thanks
JT

[jthornton]

Wow John
I had absolutely no idea you were working on a commercial product.
Welcome.

Thanks Roger been working on this almost a year now.

JT

[capt.jim]

Welcome John, looks like some nice products headed our way.

[jthornton]

Welcome John, looks like some nice products headed our way.

Thanks Jim, I can't wait to get them all in the store.

JT

[lookerjdc]

received the dash mounts 2 days ago. neither my brother or I have had the time to install yet but maybe tomorrow I will put mine on and once I get the ram balls installed will send you some pics

they look great!

[jthornton]

received the dash mounts 2 days ago. neither my brother or I have had the time to install yet but maybe tomorrow I will put mine on and once I get the ram balls installed will send you some pics

they look great!

Thanks, I can't wait to see the photos.

JT

[lookerjdc]

84849

[jthornton]

Looking good!

JT

[crazyspyder]

JUST received mine - brushed stainless steel. high quality and a good price.:firstplace: will pass the word around JT!
84899 my ram mounts are bigger than the holes ..so I am shopping for smaller ones!

[jthornton]

JUST received mine - brushed stainless steel. high quality and a good price.:firstplace: will pass the word around JT!
84899 my ram mounts are bigger than the holes ..so I am shopping for smaller ones!

Looks good!

JT

[jthornton]

Some of you know I'll be in Puerto Rico for the next few days so no Internet unless the hotel has wifi. I'll see when we get there.

JT

[Jeriatric]

Enjoy your trip :thumbup:

[jthornton]

Enjoy your trip :thumbup:
Thanks, we will try to have as much fun as we can. But it is not a vacation really as we are going to scatter my mother in law into the sea at her place of birth. Other than that we should have fun.

JT

[Jeriatric]

Thanks, we will try to have as much fun as we can. But it is not a vacation really as we are going to scatter my mother in law into the sea at her place of birth. Other than that we should have fun.

JT

So sorry.:opps:

For some strange reason. I knew I had stepped in it with that post..:opps:

[jthornton]

So sorry.:opps:

For some strange reason. I knew I had stepped in it with that post..:opps:

No worries you didn't know.

JT

[jthornton]

Wow there is a desktop computer in the room here in Puerto Rico... much better than trying to read the forum on the Galaxy 4.

John

[m109anc]

JT
1. I interested in your NHR Carrier, do you have detail pictues of it installed on the Spyder RT?
2. How much weight will it handle?
3. How much does it cost?

It is a good looking carrier:yes::yes:
KD

[jthornton]

JT
1. I interested in your NHR Carrier, do you have detail pictures of it installed on the Spyder RT?
2. How much weight will it handle?
3. How does it cost?

It is a good looking carrier:yes::yes:
KD

I've updated the SpyderStore.com with some photos from today. Heading to Spyders on the Bayou in the morning. This is prototype 2 and it's looking good to me a road test is in order. No numbers yet, but like the rest of my products I'll sell them as low as possible.

JT

[revjvegas]

JT

2. How much weight will it handle?

KD

Regarding that question, I would think that 40-lbs would be the limit since that's the recommended max on the tongue weight.

Like the looks of it too. Would be great to use when the full load capacity of the trailer is not required.

[jthornton]

Regarding that question, I would think that 40-lbs would be the limit since that's the recommended max on the tongue weight.

Like the looks of it too. Would be great to use when the full load capacity of the trailer is not required.

Yea, I would not go over that. I pack our clothes and stuff that we take into the hotel room. I also bring along a dry bag and bungee that to the top. I'd still bet it is not 40lbs. For long weekends it provides enough space to not have to wash clothes. I've been on several trips with it on the Spyder and the Goldwing (different mount, same dry box). I've sat on it and raised my feet off the ground and it didn't budge... oh I'm 180 now.

JT

[m109anc]

JT
1. I interested in your NHR Carrier, do you have detail pictues of it installed on the Spyder RT?
2. How much weight will it handle?
3. How much does it cost?

It is a good looking carrier:yes::yes:
KD

JT,
Is there any updates on your NHR Carrier
1. When will it be availble?
2. Cost?

Thannks
KD

[jthornton]

JT,
Is there any updates on your NHR Carrier
1. When will it be availble?
2. Cost?

Thannks
KD

I'm still waiting for my Spyder to return so I can fit up the final prototype. As most of you know I had an engine failure on the I-310 bridge over the Mississippi river with the west bound lanes closed for construction there was no place to pull off so the Spyder had to get me over the bridge which it did wonderful job of. Engine was toast when I stopped. As soon as I get it back I'll be able to resume work on the NHR Carrier. I saw the pile of parts Saturday and they had the new short block but didn't have the new heads yet.

JT