PDA

View Full Version : Question on removal...


carajony
02-09-2014, 01:00 PM
Can someone advise on how to take out this piece. Just didnt want to start sticking a flathead in there and breaking something...
83059Thank you in advance...
Bob Denman
02-09-2014, 01:15 PM
:shocked: I hate to say this; but it sure LOOKS as if it's that sort of job...
Why not take a real thin-bladed pocketknife, and carefully do some "exploring" around the edges with it first?
Good Luck! :thumbup:
SpyderAnn01
02-09-2014, 01:32 PM
I tried looking in the Parts/Accessories catalog to see if they post the instructions for GPS mount but that would be too easy.
Bob Denman
02-09-2014, 01:35 PM
:shocked: Perhaps a Corkscrew??? http://smileys.smileycentral.com/cat/36/36_11_1.gif
stevedfive
02-09-2014, 01:54 PM
You use a thin flat blade screwdriver and pry from the top. It's just plastic and doesn't take much effort. I just put a piece of tape on both sides of the blade to keep it from scratching the handle bar.
NorthStar
02-09-2014, 02:54 PM
Can someone advise on how to take out this piece. Just didnt want to start sticking a flathead in there and breaking something...
83059Thank you in advance...

Insert a small flat screw driver under an edge and pry upwards. It will pop off with surprisingly little force. It has two plastic tabs that help keep it in place. The good thing is that it can be removed and replaced many times. I notched it a bit on one edge to run a wire from my gps to my fuse block.
Chupaca
02-09-2014, 03:21 PM
It does look that way. As suggested small flat blade or pocket knife. The only other would be to remove the whole piece tos see the back. Must pop out though..!! :thumbup:
carajony
02-09-2014, 10:33 PM
Thank you all. Figured it might have been attached to the muffler somehow. :roflblack: I love :spyder2: Gona try tomorrow.
SNOOPY
02-09-2014, 10:51 PM
Thank you all. Figured it might have been attached to the muffler somehow. :roflblack: I love :spyder2: Gona try tomorrow.



There's a button under the seat that pops that part out. :p




Here's a pic of it...





http://i670.photobucket.com/albums/vv61/fastestshelby2/2013%20Can%20Am/PhotoAug3015011PM_zps4f2646a0.jpg (http://s670.photobucket.com/user/fastestshelby2/media/2013%20Can%20Am/PhotoAug3015011PM_zps4f2646a0.jpg.html)