Finally a Spyder ;ift I can trust.

[DR Buck]

This is better than Christmas. :yes: My new lift finally arrived. :ohyea: I order it back in mid October. This thing is a beast and will make doing mods, farkles and service much easier.

http://www.spyderlovers.com/forums/attachment.php?attachmentid=80785&d=1387403887

http://www.spyderlovers.com/forums/attachment.php?attachmentid=80784&d=1387403882

http://www.spyderlovers.com/forums/attachment.php?attachmentid=80783&d=1387403875

It's a Handy B.O.B. and will lift 1500 lbs with 100 psi of air. http://www.handyindustries.com/products/bob-1500-air-lift

[Lamonster]

Looks like a good quality lift. :doorag::thumbup:

[Cruzr Joe]

Really nice, but really expensive

Cruzr Joe


Sent from my iPad using Tapatalk HD

[billybovine]

Looks like a good one. I will have to convince myself I need one.

[DR Buck]

Really nice, but really expensive

Cruzr Joe


Sent from my iPad using Tapatalk HD

Even more so Joe. :yikes: I bought the whole package that includes the Spyder conversion, ATV side rails, scissor jack, and the "Deck Hand" so I can use it to do service on my ATVs and Zero Turn mower as well. That makes most of it "farm equipment" and tax deductible.

[Bob Denman]

Thanks for the information abou it; that thing's a real beauty! :2thumbs:
Now; How do I convince the Missus??? :shocked:

[bbodah]

Wow, Sweet looking Ride Too!

[cuznjohn]

had a garage i would own one but i work in a 12x13 shed and it is hard to get anything else in there

[IGETAROUND]

Wow that's a great looking lift. Have a dealer within 20 miles of my home. Will have to look into this. Thanks:bowdown::ohyea::clap:

[Dan McNally]

Sweet!

[Motorcycledave]

Hi Dave here can you give me some details on the lift ?
where did you get it and what is the cost ?
when you get a min. call me at 209-887-3283 or email me at
motorcycledave@@mac.com
Thanks :thumbup:
Dave


Even more so Joe. :yikes: I bought the whole package that includes the Spyder conversion, ATV side rails, scissor jack, and the "Deck Hand" so I can use it to do service on my ATVs and Zero Turn mower as well. That makes most of it "farm equipment" and tax deductible.

[spacetiger]

http://www.handyindustries.com/products/bob-1500-spydertrike-extension

This is just the kit to mod the lift

[old Timer]

A big plus for the Handy lift.

Here is the one I bought for San Jose BMW back in the mid 70's. It has lifted thousands upon thousands of motorcycles. It was given to me several years ago where I used it in my man cave built up in the mountains of Arizona.


http://deansbmw.smugmug.com/Other/BMW-K1600-GT/i-PT2Bmw3/0/L/07-23-11....1974%20R75%20slash%206%20BMW%20016-L.jpg

Here it is holding one of my motorcycles in the new Man cave I am building here in the Smokey Mountains. It has never had the slightest problem and has always worked flawlessly.
http://deansbmw.smugmug.com/Other/Motorcyclist-Cafe-East-Barn/i-TFR6tKX/0/L/Motorcyclist%20Cafe%20Barn%20East%20002-L.jpg

[bmwlarry]

I agree totally - Handy is the way to go!

80800

[DR Buck]

I agree totally - Handy is the way to go!

80800

What model is this lift? Looks like the B.O.B. Handy with ATV ramps but only wider. I have the ATV option as well as the Spyder option but haven't put the ATV side boards on yet. I don't believe the ATV sides are wide enough for the Spyder wheel base.

[bmwlarry]

It is a handy lift with the side extensions. I used it with my BMW K1200LT for years. When I bought the spyder, I located a couple of longer poles so I could move the side extension pieces out to accommodate the spyder. I had to build wooden ramps since the ramp wasn't wide enough.

[DR Buck]

It is a handy lift with the side extensions. I used it with my BMW K1200LT for years. When I bought the spyder, I located a couple of longer poles so I could move the side extension pieces out to accommodate the spyder. I had to build wooden ramps since the ramp wasn't wide enough.

Wish I knew that before I ordered. I could have saved some $$$ and bought only the ATV side extensions kit, then done the same thing and looked for longer center bars (poles). The new design Handy has the ramps are not a problem. There are 3 ramps, a wide one for the center table with separate ramps that connect directly onto the extensions. SO if you move an extension out, the ramp will also move out.

[mike5511]

I don't own a CanAm, but I'm lookin'. I do own a Handy B.O.B. 1500 lift with side extensions and a front extension. I'm betting I can fabricate something to accommodate the Spyder if I end up with one!:)

[Orange Spyder Man]

WoW nice lift... a little over my budget thou.. ----------------- I have this lift and it works great.. used it to install my BahaRon sway bar & smooth spyder belt tensioner... 1700lb capacity -- $116.95 from Amazon w/free shipping...

100644

[Marker]

Looks like that its worth the money :thumbup:

[JayBros]

That Handy induces tool drool! Very nice looking lift.

[Chupaca]

and you have good reason to have one of this quality. Very nice congrats..!! :2thumbs:

[DJFaninTN]

I agree totally - Handy is the way to go!

80800



you've got to shoot a video of that! come on .... we'd love to see it:thumbup:

[mike5511]

oops...duplicate post.

[mike5511]

Nice mod and what I have in mind also! I bought mine used and got a really good deal on it. Handy B.O.B. 1500 lb lift, with side and front extensions, and it was like new. Retail about $2500! I gave $1000! I was looking at a Harbour Freight lift, but realized I could buy this one and probably get my money back 10 years later, so I did. Works good for the lawn mower and 4 wheeler too! I don't usually find deals like that, usually a day late and dollar short!