Pull Back Handlebars in stock and now shipping!

[Mad Matt]

We have been getting alot of phone calls and emails regarding our new handlebar and center console set up for the Spyder. I finally have the production bars in my hands so I put together this photo with the dimensions so everyone will know exactly what these bars are. These bars were designed specifically for the Spyder and have the correct knurling in the center. They are .095 DOM tubing, not the cheaper tubing with a seam or thinner wall. They are beautifully powder coated gloss black. Some people are concerned that the stock cables will not reach with the taller bars. The test bars I currently have mounted on my Spyder are 8~9 inches tall (per the diagram below) and the stock cables still work! The pic of my Spyder shows the center console with the yellow spyder web inlay. You can also see there are 3 built in mount points located in the ideal locations for GPS, Intercom, MP3, and even a cup holder or whatever you want. Mine currently has the Garmin Zumo 550 on the right, the J&M Intercom and CB on the left and a cup holder in the center position. We provide a universal GPS mount that has the Garmin Zumo hole pattern already designed in. Also remember, with these bars, you can rotate them in the handlebar clamp for significant fore and aft adjustment capability, something you can not do with the stock handlebar cover. This setup also works even if you already have the BRP riser installed.

http://www.chromegarage.com/pics/matt/001/Slide1.JPG

http://www.chromegarage.com/pics/matt/001/_DSF0649.jpg

Mad Matt

[Lamonster]

Looks good Bro. :thumbup: So am I going to get to see this in Sturgis? I can't get Big Joe to call me back and let me know if he's going to be there. It would be cool if we all could get some riding in. :doorag:

[Mad Matt]

Looks good Bro. :thumbup: So am I going to get to see this in Sturgis? I can't get Big Joe to call me back and let me know if he's going to be there. It would be cool if we all could get some riding in. :doorag:


I thought you were coming here to AZ? Maybe we will ride together to CO or there abouts.

Mad Matt

[Lamonster]

I thought you were coming here to AZ? Maybe we will ride together to CO or there abouts.

Mad Matt


I am, but I didn't know if you guys had plans to head out there or not. I know a real biker would. :D:doorag:

http://www.chromegarage.com/pics/joe/M109/Pack3.jpg

[ataDude]

We have been getting alot of phone calls and emails regarding our new handlebar and center console set up for the Spyder. I finally have the production bars in my hands so I put together this photo with the dimensions so everyone will know exactly what these bars are. ...
Mad Matt

I guess that means my 5" (black panel, silver web) set-up has shipped to Allen, TX? :clap:

Yippee!

[Mad Matt]

I am, but I didn't know if you guys had plans to head out there or not. I know a real biker would. :D:doorag:




Oh well, they dont let me hang with the real bikers, I am always too busy fixing the computers or doing something nerdy..........

;)

Matt

[Big Joe]

I guess that means my 5" (black panel, silver web) set-up has shipped to Allen, TX? :clap:

Yippee!

It shipped today AtaDude
Big Joe

[ataDude]

It shipped today AtaDude
Big Joe

:2thumbs::clap::2thumbs::clap:

Lamont is my hero... I'm still trying to get it "dialed" in, too. :D

I've been a "pioneer" on quite a few new motors in the last 15 years and the after-market support for the spYder is the best and quickest, by far thanks to folks like you, Matt, Magic Man, et al. :thumbup:
.
.

[Big Joe]

I am, but I didn't know if you guys had plans to head out there or not. I know a real biker would. :D:doorag:



A Trip I Will Never Forget My Friend
http://www.chromegarage.com/pics/joe/M109/Lamonster%201.jpg
:2thumbs:

[Lamonster]

A Trip I Will Never Forget My Friend
:2thumbs:

Nor I. :D :doorag:

http://bigbikeriders.com/photopost/data/4970/1DSCN09330281.JPG

[NancysToy]

A Trip I Will Never Forget My Friend
http://www.chromegarage.com/pics/joe/M109/Lamonster%201.jpg
:2thumbs:
Friend of mine hit one of these critters on his BMW a few years back on a trip to Alaska. They now call him "Buffalo Phil."
-Scotty

[bjt]

Friend of mine hit one of these critters on his BMW a few years back on a trip to Alaska. They now call him "Buffalo Phil."
-Scotty


Wow. How could he have not seen that huge thing in his way?

[Sopher]

We have been getting alot of phone calls and emails regarding our new handlebar and center console set up for the Spyder. I finally have the production bars in my hands so I put together this photo with the dimensions so everyone will know exactly what these bars are. These bars were designed specifically for the Spyder and have the correct knurling in the center. They are .095 DOM tubing, not the cheaper tubing with a seam or thinner wall. They are beautifully powder coated gloss black. Some people are concerned that the stock cables will not reach with the taller bars. The test bars I currently have mounted on my Spyder are 8~9 inches tall (per the diagram below) and the stock cables still work! The pic of my Spyder shows the center console with the yellow spyder web inlay. You can also see there are 3 built in mount points located in the ideal locations for GPS, Intercom, MP3, and even a cup holder or whatever you want. Mine currently has the Garmin Zumo 550 on the right, the J&M Intercom and CB on the left and a cup holder in the center position. We provide a universal GPS mount that has the Garmin Zumo hole pattern already designed in. Also remember, with these bars, you can rotate them in the handlebar clamp for significant fore and aft adjustment capability, something you can not do with the stock handlebar cover. This setup also works even if you already have the BRP riser installed.

http://www.chromegarage.com/pics/matt/001/Slide1.JPG

http://www.chromegarage.com/pics/matt/001/_DSF0649.jpg

Mad Matt


MATT, Can you tell us the price of these new bars? When is the estimated time to ship the bars?

[Mad Matt]

Sopher,

The Bars sell for $69. We have a few sets in stock and ready to ship. The remainder of the first production run is a week or two away. I had all the vendors ship me handfulls of everything as soon as they had a few ready to go so we could start filling orders. The bulk of the first production run of all the various parts for the bars and center consoles are all being run as we speak. We are filling as many orders as we can as the parts come in and on a first come first serve basis. We sell quite a few Spyder parts in Europe, Canada, and other countries as well.

Just FYI, Joe and I will be out of the office untill Monday. We will try and answer questions on the board as soon as we can, but I am not sure if I will get to a computer past tomorrow morning untill Monday.

Matt