New Spyder Web!

[Mad Matt]

You will have to just picture it installed on the Spyder till I get a chance to bolt it on!

http://www.chromegarage.com/pics/matt/001/IMG_1810.jpg
http://www.chromegarage.com/pics/matt/001/CIMG6330.jpg

Mad Matt

[spyder18]

have you set a price yet

[Lamonster]

:bigthumbsup: :spyder:

[Smylinacha]

:a18:

[jnt]

Oooo. Does that come in silver? :bigthumbsup:

[Twodog185]

Release Date????

[FANG]

:2cool:
looks great

[Mad Matt]

Right now it looks like the plain center cover kit will be $199, and the Spyder web cover will be $249. Keep in mind this is a beautiful piece of billet Aluminum Machined in the USA with two additional pieces of sheet metal to mount and cover the ignition, all 3 pieces are powder coated, and all stainless mounting hardware. There are 3 mounting points with tapped holes already there for mounting gizmos. The Handle bars will be $69. We will have complete kits in a few weeks. There are only a handfull of the initial kits because we only ran pilot production to make sure everything is perfect. Depending on orders, we should have a full production run 4 weeks after that.

The two handle bars we will have available will be a 5 inch rise and a 7 inch rise.

The baseline color is black, but we will powder coat to whatever color you want.

Once the kits are posted on our website, you can call in your orders. Keep in mind, because of custom colors, and options, each order is packaged one at a time and it normally takes a few days to a week especially if we need to powder coat something to your color. Your CC is never charged until your order ships. It is best to get your orders in early, it helps us plan a little better.

PS - we won't have the handle bars for about 2-3 more weeks, so that is the earliest we can ship any complete kits.


Mad Matt

[COSpyder]

I am calling tomorrow! YAY!

[pphantom538]

quality work.

[ptoemmes]

Mad Matt - nice work to say the least. Two Qs:

1) Will this work for the soon-to-be SE5? I guess it might even be simper with no clutch lever

2) Where should the fog light switch go?

Thanks,

Pete

[Mad Matt]

Mad Matt - nice work to say the least. Two Qs:

1) Will this work for the soon-to-be SE5? I guess it might even be simper with no clutch lever

2) Where should the fog light switch go?

Thanks,

Pete


1) I have not seen the SE5 in person, but if the handle bar cover and riser is the same, my cover should bolt on no problem. No clutch would just make the install easier, yes.

2) If you are asking about the switch for the BRP fog lights, where does it go on a stock spyder??
My driving light switch for my Kewlmetal driving light setup will go in the black plastic of the instrument housing.

Matt

[NancysToy]

2) If you are asking about the switch for the BRP fog lights, where does it go on a stock spyder??

The dealer installed ours by drilling a hole through the black body panel just below and to the left of the handlebars.
-Scotty

[ptoemmes]

NancysToy - ahh, yes, that was a brain fart. The BRP fog light switch is in body panel.

Matt - thanks as well.

Pete

[Big Joe]

Oooo. Does that come in silver? :bigthumbsup:

We can do all the colors you choose including Chrome or even Gold plated.
Big Joe.