View Full Version : vented windshield
OLD FTS
05-30-2013, 04:29 PM
Are there any after market vented windshields out there for the RTs? Thanks.
Rando
05-30-2013, 04:34 PM
http://www.calsci.com/motorcycleinfo/SpyderRTprod.html
:clap:
stevedfive
05-30-2013, 04:39 PM
F4 Customs was in the process of making one when I contacted them a few months ago.
Bob Denman
05-30-2013, 04:59 PM
Any reason why you're not looking at BRP's offerings?
Or are you? ;)
spyder3
05-30-2013, 05:27 PM
http://www.calsci.com/motorcycleinfo/SpyderRTprod.html
:clap:
I looked at these, the only thing that would concern me is it's an always open vent....:dontknow:
stevedfive
05-30-2013, 05:59 PM
BRP 25" adjustable vent windshield.
6902669027
SpyderAnn01
05-30-2013, 08:08 PM
BRP 25" adjustable vent windshield.
6902669027
Also available in 23"
samewok
05-30-2013, 08:30 PM
BRP vented windshield is comes in 23" to 25". It can be open or closed at any time. Mine is open because it reduces wind buffering.
lionking
05-30-2013, 11:10 PM
I have a 23" BRP. It really is great. Buffiting is reduced and no vacum to suck in dirt. I can open or close the vent or any setting inbetween.
Glider3J
05-31-2013, 05:44 AM
I have to new BRP 25 inch. I had it installed at Spyderfest and am very happy with it.
jthornton
05-31-2013, 06:33 AM
I use the BRP 23" vented for summer and the stock windshield for winter.
JT
ulflyer
05-31-2013, 06:56 AM
I bought a used Gold Wing vent to install on mine, but chickened out on cutting the opening. Afraid I would screw it up and then have to buy a new WS. If any of you are bold enough to try, I'll make you a deal. :)
warp10
05-31-2013, 07:31 AM
:thumbup: Same here, got the 23" vented from BRP very happy with it. :yes:
cyclelover63
06-23-2013, 01:08 AM
I have to new BRP 25 inch. I had it installed at Spyderfest and am very happy with it.
Who handled them at Spyderfest,Glider?...may have to have me one!
TuckMiddle
06-23-2013, 03:58 AM
Just bought a 23 inch BRP vented one yesterday. The vent is roughly 1/2 again larger than the Goldwing vent and seems to be an excellant solution. I've used a Goldwing vent on my Harley Road Glide and it was OK and I was going to put it on my RT until I took a good look at the BRP solution. A little expensive, but combined with some adjustable wings, it has really made the RT more comfortable.
Tuck
Bob Denman
06-23-2013, 06:44 AM
Who handled them at Spyderfest,Glider?...may have to have me one!
Len had them at SpyderFest, but any BRP dealer can get them... or has them in stock! :thumbup:
Plyrod38
06-23-2013, 06:50 AM
Installed a goldwing vent on my stock windshield yesterday. I'll try it out today. The install wasn't difficult, but I was aprehensive of making the first cut. I also shortened the windshield by 2".
stallion143
08-06-2013, 09:34 PM
I bought a used Gold Wing vent to install on mine, but chickened out on cutting the opening. Afraid I would screw it up and then have to buy a new WS. If any of you are bold enough to try, I'll make you a deal. :)
Did you get a vent for the 1500 or 1800?
Tinted or clear?....Do you still have it? If so, how much?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.