View Full Version : Removing the lower piece on the frunk??
NoJive
04-28-2013, 08:45 PM
I need to remove the lower piece of the frunk hood panel, the piece that has the BRP logo. I unclipped the two clips on either side, but seems to be held in the middle somewhere. Any ideas?
billybovine
04-28-2013, 10:53 PM
A 3rd dead center under the medallion. You have to get at it from the front.
NoJive
04-29-2013, 09:30 AM
A 3rd dead center under the medallion. You have to get at it from the front.
So I have to remove the medallion to get at it?
CyncySpyder
04-29-2013, 09:49 AM
http://parts.spyder.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\1s\\06\Y1004\31Y 1004a.tif&ilSC=20&ilIV=0&ilBR=0&ilIF=P&ilRE=8
CyncySpyder
04-29-2013, 09:51 AM
http://parts.spyder.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\1s\\06\Y0801\31Y 0801a.tif&ilSC=20&ilIV=0&ilBR=0&ilIF=P&ilRE=8
NoJive
04-29-2013, 07:17 PM
Thanks Dave!
MikeinGA
04-29-2013, 09:19 PM
I need to remove the lower piece of the frunk hood panel, the piece that has the BRP logo. I unclipped the two clips on either side, but seems to be held in the middle somewhere. Any ideas?
I have a Can-Am Service & Repair Manual for 2008 - 2009 Spyder GS. If you want it, sent me your address in a private message and I'll sent you the CD.
Mike
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.