Removing the lower piece on the frunk??

[NoJive]

I need to remove the lower piece of the frunk hood panel, the piece that has the BRP logo. I unclipped the two clips on either side, but seems to be held in the middle somewhere. Any ideas?

[billybovine]

A 3rd dead center under the medallion. You have to get at it from the front.

[NoJive]

A 3rd dead center under the medallion. You have to get at it from the front.

So I have to remove the medallion to get at it?

[CyncySpyder]

http://parts.spyder.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\1s\\06\Y1004\31Y 1004a.tif&ilSC=20&ilIV=0&ilBR=0&ilIF=P&ilRE=8

[CyncySpyder]

http://parts.spyder.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\1s\\06\Y0801\31Y 0801a.tif&ilSC=20&ilIV=0&ilBR=0&ilIF=P&ilRE=8

[NoJive]

Thanks Dave!

[MikeinGA]

I need to remove the lower piece of the frunk hood panel, the piece that has the BRP logo. I unclipped the two clips on either side, but seems to be held in the middle somewhere. Any ideas?

I have a Can-Am Service & Repair Manual for 2008 - 2009 Spyder GS. If you want it, sent me your address in a private message and I'll sent you the CD.

Mike