Bushtec Hitch on the way

[Spydroe]

I have my Bushtec hitch on the way Lamont. The only bike I don't have setup for it will be my 67 Triumph and I think I'll let that one alone.http://i106.photobucket.com/albums/m274/roknroe/Mypics036.jpg

[Lamonster]

Cool. I think you're going to really like the way that hitch is built and how well the Spyder tows a trailer. :bigthumbsup: :doorag: :spyder:

[NancysToy]

Cool. I think you're going to really like the way that hitch is built and how well the Spyder tows a trailer. :bigthumbsup: :doorag: :spyder:

...and how good it looks in pictures! ;D

[spyderrider44]

Was on Bushtec web site couldn't find any info on the hitch for the :spyder: does anyone know the price ?

[vwatso]

go to ebay.look under motorcycle parts for can am. They are there starting at $275.00
There is also shock boot covers for spyders. I hope this helps?

[spyderrider44]

:bigthumbsup: that will help alot thanks :a18: vwatso

[Lamonster]

go to ebay.look under motorcycle parts for can am. They are there starting at $275.00
There is also shock boot covers for spyders. I hope this helps?


That's not a Bushtec hitch. That's one that is mounted on the swingarm (Very Bad Idea) ::)

Was on Bushtec web site couldn't find any info on the hitch for the :spyder: does anyone know the price ?


Best to call them. Their website is not updated very often, they're too busy making trailers and hitches. ;D

[spyderrider44]

:spyder: i checked out e-bay and your right Lamontster it is not a Bushtec , i will be calling them , vwatso thnks for the input anyway,did like the coil guards ;D

[Lamonster]

:spyder: i checked out e-bay and your right Lamontster it is not a Bushtec , i will be calling them , vwatso thnks for the input anyway,did like the coil guards ;D


This should send up a red flag right away.

"DISCLAIMER NOTE: MMG LLC AND ANYONE ASSOCIATED WITH SAID PRODUCT IS NOT HELD RESPONSIBLE FOR ANYTHING RELATIED TO ANY WRONG DOING ASSOCIATED WITH SAID PRODUCT OR ATTACHING PARTS OR PRODUCT."

http://i16.ebayimg.com/06/i/000/e2/f0/47a2_1.JPG

[Spydroe]

Lamont, Are the wires for the trailer connection running through the down supports on yours? When I talked to Andrews dad yesterday he said he thought they did yours that way. I emailed Andrew today about seeing if they could run my loom through the tube. He is off at an event right now though.

[Lamonster]

Lamont, Are the wires for the trailer connection running through the down supports on yours? When I talked to Andrews dad yesterday he said he thought they did yours that way. I emailed Andrew today about seeing if they could run my loom through the tube. He is off at an event right now though.


They are ran in the right side of the bottom hoop.

http://img2.putfile.com/thumb/5/13320441962.jpg (http://www.putfile.com/pic/8144738)http://img2.putfile.com/thumb/5/13320441995.jpg (http://www.putfile.com/pic/8144739)

[2faston3]

Prices are as follows...

$479 for Ball
$579 for Heim Joint and Pin

This comes from John himself.

2faston3

[spyder18]

what is a Heim Joint and Pin

[Twodog185]

I had hitchdoc.com make me a special hitch for my Softail. Chromed, and very strong. It only cost $275.00. Hard to imagine buying something for a Can-Am that's twice the price as a Harley product. HD doesn't even sell a backrest/rack combination for anything close to $600. My how times have changed. I'm still going to buy a hitch...I think they're cool.

<a href="http://s288.photobucket.com/albums/ll171/twodog35120/?action=view&current=hitchpic.jpg" target="_blank"><img src="http://i288.photobucket.com/albums/ll171/twodog35120/hitchpic.jpg" border="0" alt="Photobucket"></a>

[Twodog185]

need to learn how to post a pic.


http://i288.photobucket.com/albums/ll171/twodog35120/hitchpic.jpg