I’M having some difficulty aligning my drive belt and tensioner the belt is "walking"

[bigsims330]

I’M having some difficulty aligning my drive belt and tensionerthe belt is "walking" off the left side of the pulley for the life of me I can’t seem to get it right Iwas a mechanic in the military for 6 years so I have some mechanical experienceif someone that was more mechanically inclined then myself could give me ashort tutorial I would be much appreciative

[SpyderAnn01]

:welcome: I can't offer you an help but just wanted to say hi and good luck with your belt.

[NancysToy]

Better check your front sprocket and output shaft for play. Also check the rear wheel and sprocket bearings.

[bigsims330]

Better check your front sprocket and output shaft for play. Also check the rear wheel and sprocket bearings.

thxs i'll give it a try

[boborgera]

How far off is it walking?, The belt should not be right against the rear pulley flange.
Also it's normal for it to walk a little when backing up, Or when stopping after a sharp turn, ie, turning sharply into a spot then stopping. Once you move the Spyder 15 feet or more in a straight line it will walk back.

[Lamonster]

http://www.spyderlovers.com/forums/showthread.php?37974-RT-Hitch-removal-and-belt-adjustment

[bigsims330]

http://www.spyderlovers.com/forums/showthread.php?37974-RT-Hitch-removal-and-belt-adjustment

thxs i think i got it :clap: