Air Wing Guy
03-05-2013, 03:19 PM
New Spyder "Belt Stabilizer™
From Baker Built Air Wings ™
• Stops Belt Flap & Vibration
• 5 Minute Installation; No Holes to Drill
• No Measuring Required; One Simple Adjustment
• Under $200.00 Introductory Offer
• Should fit most RT, RS & ST Models
(More Research needed on this)
•All Brackets 6061 Aluminum; All Hardware 18-8 Stainless
• Black Powdercoated Optional
• Patent Pending
NEW EASY INSTALLATION
633796338063381
1. Remove Flange Nut A in Photo 1.
2a- Take assembled stabilizer kit and install with grooved side of bracket towards tire.
b- Make sure grove in bracket fits over flange of Spyder Air Spring Bracket as is in Photo 3.
3. Reinstall Flange Nut and Tighten Securely ( See Photo 4)
6338263383
4a. Pull Down Front End of Pulley Assembly Bracket and Install Belt Pulley
b. The Two nuts on belt pulley bolt needs to be adjusted so that pulley is centered over center of belt
(See photo 5)
TIGHTHEN ALL BOLTS SECURELY
From Baker Built Air Wings ™
• Stops Belt Flap & Vibration
• 5 Minute Installation; No Holes to Drill
• No Measuring Required; One Simple Adjustment
• Under $200.00 Introductory Offer
• Should fit most RT, RS & ST Models
(More Research needed on this)
•All Brackets 6061 Aluminum; All Hardware 18-8 Stainless
• Black Powdercoated Optional
• Patent Pending
NEW EASY INSTALLATION
633796338063381
1. Remove Flange Nut A in Photo 1.
2a- Take assembled stabilizer kit and install with grooved side of bracket towards tire.
b- Make sure grove in bracket fits over flange of Spyder Air Spring Bracket as is in Photo 3.
3. Reinstall Flange Nut and Tighten Securely ( See Photo 4)
6338263383
4a. Pull Down Front End of Pulley Assembly Bracket and Install Belt Pulley
b. The Two nuts on belt pulley bolt needs to be adjusted so that pulley is centered over center of belt
(See photo 5)
TIGHTHEN ALL BOLTS SECURELY