side mirror clips

[StriperKing]

I probably already know the answer to this but has anyone ever been able to get any of the mounting clips that hold the side mirrors on for the RT? :pray: I need the top one that slides down on the pin before the spring wire clips press in. DO NOT take these mirrors off if the plastic is real cold!

[KCPete]

I probably already know the answer to this but has anyone ever been able to get any of the mounting clips that hold the side mirrors on for the RT? :pray: I need the top one that slides down on the pin before the spring wire clips press in. DO NOT take these mirrors off if the plastic is real cold!

Yup..been there, done that. About $4-something at the dealer. That top one is actually the same for either side, too, so you only have to have one for a spare. ( I KNOW I'll break it again sometime when I'm in too much of a hurry...)

[NancysToy]

The lower spring clips, which BRP calls "housings", P/N 219800156, are listed as not available". Check with your dealer for a replacement part number.

The upper "keyhole" clip (called a housing clip) is P/N 219800158, MSRP $5.99, shows as available. It can be ordered from your dealer or direct from BRP at www.store.spyder.brp.com/ (http://www.store.spyder.brp.com/).

[StriperKing]

Yup..been there, done that. About $4-something at the dealer. That top one is actually the same for either side, too, so you only have to have one for a spare. ( I KNOW I'll break it again sometime when I'm in too much of a hurry...)

Thanks, off to the dealer I go and yes I will order some spares.

[Sarge707]

After Taking these mirrors off a Few times BRP should change it to a Post on the top and Bottom and THEN a Torx 30 Screw into the front part? Trying to get ALL Three Posts on is Whats Driving people NUTS!!!!!!!!!!!!
Put a Post for the Top and Bottom OR Top and Front and then a T-30 Screw for the 3rd connection and the problem would "Go Away?"nojoke

[StriperKing]

After Taking these mirrors off a Few times BRP should change it to a Post on the top and Bottom and THEN a Torx 30 Screw into the front part? Trying to get ALL Three Posts on is Whats Driving people NUTS!!!!!!!!!!!!
Put a Post for the Top and Bottom OR Top and Front and then a T-30 Screw for the 3rd connection and the problem would "Go Away?"nojoke

I agree.

[kevorama]

The lower spring clips, which BRP calls "housings", P/N 219800156, are available on one of our sponsors sites - SpyderCity RT Sales. They are $12.47 each.

The part no. in the exploded view on their site is 60b

http://www.rtsales.org/fiche_section_detail.asp?section=1630619&category=Motorcycles&make=Can-Am&year=2011&fveh=48045

[StriperKing]

The lower spring clips, which BRP calls "housings", P/N 219800156, are available on one of our sponsors sites - SpyderCity RT Sales. They are $12.47 each.

The part no. in the exploded view on their site is 60b

http://www.rtsales.org/fiche_section_detail.asp?section=1630619&category=Motorcycles&make=Can-Am&year=2011&fveh=48045

Gotta love this site!

[Bob Denman]

The lower spring clips, which BRP calls "housings", P/N 219800156, are listed as not available". Check with your dealer for a replacement part number.

The upper "keyhole" clip (called a housing clip) is P/N 219800158, MSRP $5.99, shows as available. It can be ordered from your dealer or direct from BRP at www.store.spyder.brp.com/ (http://www.store.spyder.brp.com/).
Scotty,
Thanks for those part numbers. With my recent playtime with the mirrors; I can smell a disaster brewing! :shocked: Somep spares are a very wise option. :thumbup:

[rcdurango]

sent you IM
I have those in stock.