Adding color to Pure Mag ST-S

[Spydr in KS]

What do you think? The RSS I copied onto the hood would say ST-S though. I like the red Can-Am better than the white. Borrowed from the RSS design

58846

[FaranH]

:thumbup: I'm with you - I kinda like the little dash of red on there.

[weapon]

That looks alot better than the white Canam:thumbup:

I am going with a red and black graphic on mine when it comes.

[Bob Denman]

:2thumbs: It breaks up the Gray a bit! :thumbup:
If it were mine, (which it isn't), I'd look for something nice and bright to really POP! off of the background color...

[weapon]

Does this help?

It would look great.

[weapon]

Let me try a bigger pic.
Kinda new at this.58911

[Sarge707]

How about the STS In Yellow with black shading? Silver, Yellow and Black are on their Jet Skies a LOT!

[Spydr in KS]

I like the black and red lettering best. Anybody know of a font that would work for these letters?

[Bob Denman]

I'm actually partial to the font that they used...
Hey! Why not try the "RSS" in Red, and put a white (or much lighter silver) behind it as a shadow with a trailing tail back up the cowling?
Kind of like a subtle flame?

[ARtraveler]

Good ideas above :thumbup: Show us pictures when you get it worked out. The magnesium is nice, but by itself is a lot--specially on the RT like we have.

[weapon]

How about this then??

[Spydr in KS]

I'm actually partial to the font that they used...
Hey! Why not try the "RSS" in Red, and put a white (or much lighter silver) behind it as a shadow with a trailing tail back up the cowling?
Kind of like a subtle flame?

Me too...I need to find the font or pay Pete to find it!

[Bob Denman]

Oh... sorry! I read it as you were looking for a different font :opps:
Must be another blonde, left-handed moment at this keyboard! ;)
None of our font choices looks likely; you'll probably need to get into some sort of graphics program to find a close match since this style font would never work for word processing...

[Spydr in KS]

Another thought maybe Pete's RS Rally frunk insert and a subtle ST-S in black and red.:thumbup: The frunk lid looks the same as the RS




59179

[spyderjim2012]

Black stripes looks great on silver,the metalic in black matches the sliver great

[johnnyrocket]

Black stripes looks great on silver,the metalic in black matches the sliver greatLooks real good, could we get a side shot? Thanks

[Colin]

Me too...I need to find the font or pay Pete to find it!

I'm sure any good graphics guy could create it for you, I had my RSS Red label replaced with a greyish label, and the graphics guy took a photo and did some measuring and made it for me, looks like a proper BRP one :D hopefully you can see it in the pic attached

http://i1174.photobucket.com/albums/r604/canamcol/Spyder2011028.jpg

[Spydr in KS]

Looks great!

[Bob Denman]

:agree: Subtle, and classy! :2thumbs:

[flamingobabe]

I'm working on some pink for my white ST-Limited....kinda liking this
60178

[Bob Denman]

http://smileys.smileycentral.com/cat/36/36_1_55.gif :2thumbs: :firstplace:

[Spydr in KS]

Thanks Pete!

http://www.spyderlovers.com/forums/attachment.php?attachmentid=62088&d=1360993382

http://www.spyderlovers.com/forums/attachment.php?attachmentid=62087&d=1360993209

http://www.spyderlovers.com/forums/attachment.php?attachmentid=62089&d=1360993615

[Chupaca]

Lots of ideas, now we just have to see what you end up with. We expect to see pic's..!!:2thumbs:

[Spydr in KS]

Lots of ideas, now we just have to see what you end up with. We expect to see pic's..!!:2thumbs:

Huh? I did, below your post, are they there?

[retired1]

That is one fine looking Spyder!!:thumbup:

[markmarks]

Spyder in KS, looks great!! That's exactly what we are looking for :)

[Laila's Dad]

Thanks Pete!

http://www.spyderlovers.com/forums/attachment.php?attachmentid=62088&d=1360993382

http://www.spyderlovers.com/forums/attachment.php?attachmentid=62087&d=1360993209

http://www.spyderlovers.com/forums/attachment.php?attachmentid=62089&d=1360993615

looks great! Do the racing stripes continue on the back fender?

[Spydr in KS]

Yes, once I install them! The kit also includes stripes for the air dam, but not sure how to install them yet

[Laila's Dad]

Yes, once I install them! The kit also includes stripes for the air dam, but not sure how to install them yet

Im sure you'll figure it out, what you have done so far looks professional so the additional stripes will too.

[Osros]

Thanks Pete!

http://www.spyderlovers.com/forums/attachment.php?attachmentid=62088&d=1360993382

http://www.spyderlovers.com/forums/attachment.php?attachmentid=62087&d=1360993209

http://www.spyderlovers.com/forums/attachment.php?attachmentid=62089&d=1360993615

I like it also am thinking about the same thing for mine some sort of stripes. Like it to break up the solid color on the side and rear also. I like black but I may play with another color.




Sent from my iPad using Tapatalk HD

[weapon]

Thanks Pete!

http://www.spyderlovers.com/forums/attachment.php?attachmentid=62088&d=1360993382

http://www.spyderlovers.com/forums/attachment.php?attachmentid=62087&d=1360993209

http://www.spyderlovers.com/forums/attachment.php?attachmentid=62089&d=1360993615
Love the racing stripe. Nice touch :thumbup:
Is it flat black?

[otter28169]

I like it also am thinking about the same thing for mine some sort of stripes. Like it to break up the solid color on the side and rear also. I like black but I may play with another color.

I was always a fan of Yellow, might be all the years I have spent riding ski-doo.:thumbup:

[Spydr in KS]

Love the racing stripe. Nice touch :thumbup:
Is it flat black?

It is 3M Carbon Fiber. Looks really cool in person.

Contact Pete at Powersportswraps

[Green RSS]

Looks good.

[Bob Denman]

:agree: And you did a great job! :thumbup: :clap: :firstplace:

[Wiredux]

I would like to see something like this for the RT.

[Spydr in KS]

I would like to see something like this for the RT.

Lots of RT options here

http://www.spyderlovers.com/forums/album.php?u=4688&page=3

[Spyder Wraps Pete]

I was just going to post a link to our Spyder Project Photo Galler (http://www.spyderlovers.com/forums/album.php?u=4688)y so everyone can see our latest projects but you beat me to it.
This is a great place for someone to get some graphic & decal ideas on how to dress up their Spyder.

This is probably the least expensive product you will buy for you Spyder but it will have the most visual impact.
We do a lot of customer request projects for owners who want their own unique look.

We would be happy to help...

Currently we are working on getting more Spyder products added to our website but here is a link to our Spyder web page. (http://www.powersportswraps.com/vehicle-vinyl-wraps/cam-am-spyder-kits/)

So, what's your idea...



Email: pete@powersportswraps.com
814-838-6377

[Sting]

I used to have a 57 Gunmetal Gray Tbird in my collection. The gray was a nice color but to me only looked good with a red interior. I think the red accents really set off your Spyder. I would pick my spots as to not overdo it. But combined with the Magnesium and Black, the red LOOKS REALLY GOOD!!!!