STEEL 30 T FRONT SPROCKET IS HERE

[BLUEKNIGHT911]

Go to Spyder Shop Talk for details....Mike...:yes:

[Bob Denman]

Mike,
with an avatar like yours; I've got to say, "Go get 'em boy!" :thumbup:

[BLUEKNIGHT911]

Mike,
with an avatar like yours; I've got to say, "Go get 'em boy!" :thumbup:

Yes Bob, that dog can literally LICK the skin off your hand, face, etc.....:roflblack::roflblack::roflblack::roflblac k:....thanks....Mike..........Now your dog looks downright :b2b:

[chris56]

you get it here in europe its 300 Euros incl. 20% VAT ...around 300 USD net..

http://www.batquad.de/shop/

[BLUEKNIGHT911]

you get it here in europe its 300 Euros incl. 20% VAT ...around 300 USD net..

http://www.batquad.de/shop/

Chris, according to the site you posted it lists for $390 U.S., how do you arrive at $300, and what would the shipping be ...approx. ??...Mike

[Firefly]

And what possible advantages would one reap from this that would equate to $400 ?????

[BLUEKNIGHT911]

And what possible advantages would one reap from this that would equate to $400 ?????

It wouldn't be a gun....:roflblack::roflblack::roflblack::roflblack :..:roflblack:.......Mike...:agree:....:thumbup:.. ...Peace

[r1100rider]

And what possible advantages would one reap from this that would equate to $400 ?????20,000 less turns of the motor per hour a more relaxed spyder which equals less buzz thru to the rider if you haven't ridden one geared up you could not know the feeling, your spending $100's on mods if someone want's a more relaxed spyder that isn't working as hard going down the road they should be able to have that with out everyone getting all over them about it the spline sprocket issue has pretty much went away with the lower belt tightening spec the problems were all in the very early times when the belts were way to tite

[SethO]

Its not going to eat the main shaft of the motor?

[chris56]

298 Euro incl 20% VAT = 249 Euro net price = (x1,23) 305 USD without freight

[Bob Denman]

Its not going to eat the main shaft of the motor?
Now I haven't looked at the current sprocket... :opps: If it's got a steel insert in there for strenth where it mates up to the shaft, then the engine couldn't care what the rest of it is made of...
But a bit more research is needed to either verify or disprove this...

[BLUEKNIGHT911]

298 Euro incl 20% VAT = 249 Euro net price = (x1,23) 305 USD without freight

OK, I know there has been much more than just mild interest in this item if a GOOD one was available. And this one sounds like it fills the bill. SOOOOOOOOOOOO maybe the interested parties need to speak up NOW and we can get a group buy together, and have a bunch of these shipped to the east coast ???? and maybe Distribute them at LaMont's BBQ to save on further shipping costs. ???? Just throwing this out for discussion.....Any thoughts welcome......Mike.