Easy LED trunk light mod for the RT

[Lamonster]

I was getting ready to add another LED light for my licence plate and when I unpacked the LED I saw where it had a switch and a nice little battery pack prewired to the lights. I decided to use the prewired LED as a trunk light. It was a real easy install and all I had to do is drill a couple of holes for the switch and to run the wires. It does a nice job of lighting the inside of the trunk and it's a very clean install. The lights are pretty cheap and you can find them at any auto parts store.
:doorag:

http://www.youtube.com/watch?v=uR7ECea8eFA
http://www.spyderlovers.com/forums/attachment.php?attachmentid=47664&d=1339550535

[Dizneyman]

:2thumbs:​ Thanks!!

[packbuckbrew]

Nice!

[Bob Denman]

AutoZone huh? I'll have to take a spin out there and look for one of those... THANKS! :clap:

[Macca]

Wow, easy enough. Thanks!

[Bob Denman]

Who makes those lights?? (I couldn't read the packaging...:opps:)

[EddieK]

I like it! Guese I have a project for this weekend.

[2manycars]

I installed an LED light. It takes no installation. I am still on the first set of AA batteries, and you simply press it for light. If I need a small portable light I remove it from the Velcro and put it back when done


I guess I used the K.I.S.S. system for this project.

[Lamonster]

I installed an LED light. It takes no installation. I am still on the first set of AA batteries, and you simply press it for light. If I need a small portable light I remove it from the Velcro and put it back when done


I guess I used the K.I.S.S. system for this project.
I had one of those too but I guess I left it on and ran the batteries down. This one has a spring loaded switch so that won't happen. Whatever works for you, this is just one other option. :doorag:

[TexasSpyder]

Picked up mine at Auto Zone ($15.95) last night, and will install after work today. Great idea for a simple solution.

J. D.

[Bob Denman]

Do you have a manufacturer and part number for them?
I'm not having any luck with my search. :opps:

[kyspyder]

Manufactured by ALPENA 8"/20cm FLEX LED White/Blanc/Blanco
registered trademark of the Marklyn Group, Inc. Brampton, Ontario Canada L7A 1A2
Autozone
SKU # 105-0611
IPC = 0 84902 77443 6

KYSPYDER

[Bob Denman]

Thank you sir...:bowdown:
"A farkling I will go..." :roflblack:

[TexasSpyder]

Just finished the install on the LED rear trunk lights. I installed both the LED's one on each side. I also removed the rear seat backrest, it made it easier for me to drill the holes.

J. D.