Mounting flags

[Papa Burn]

Has anyone found a simple way to mount flags on the Spyder??? My 2011 red spyder has no luggage racks so now what? Any ideas would be appreciated.

[fastfraser]

Flag mounts available for licence plates and or trailer hitches. I've used this on my RS and RT .

[Cavman]

I've has the large SpyderFest flag on my RT mounted on the bottom of the antenna. I used zip ties to secure it and put a couple above the flag on the antenna to keep it from riding up. It's been on there for almost a month with no problems.
Just make sure your antenna is down tight.

[Yol Bolsun]

Has anyone found a simple way to mount flags on the Spyder??? My 2011 red spyder has no luggage racks so now what? Any ideas would be appreciated.

Papa, RT or RS? You might go look at ISCI (http://www.isciride.com/iscirtmanualparts.htm) (scroll down the page when you get there). Same part# for RT and RS. Pricey but folks have been happy with them. That is if you are looking at the small flags. Personally, I would not tie anything on the antenna.

BTW, Welcome aboard. Join us at one of our "Meet-and-Eats".

[minerdoug]

I have a Riva dual flag holder that mounts behind the license plate with adjustable poles. A lot of the fixed poles will hit the trunk when mounted on the license plate area.

[captblack]

I have a luggage rack I got from Inspector Gadget. I mounted two flags (11x15) to it and everything seems to work well. Gusty winds will cause the one on the right to hit the antenna but seems to fly just fine.

[bullant12]

I have the Rumbling Pride Cruiser Class Mounts (CCM) (http://www.rumblingpride.com/Cruiser_Class_Mounting_System.htm) on my RT and riveted another set into a metal extention for my RT 622 Trailer (http://www.spyderlovers.com/forums/showthread.php?38580-RT-622-Trailer-Flag-Mount). When you install them on the RT, you will have to twist them out a little since out of the box the tips bump into the back end, below the truck opening.

Oh, and :welcome: