PDA

View Full Version : Ride Around Rainier - August 21st



wukka
07-24-2011, 11:59 PM
Experience a summer ride around Mount Rainier with fellow Spyder Ryders on Sunday, August 21st. Meet at Clems Powersports on Sunday morning between 8:00 and 8:30 AM for complimentary coffee and doughnuts while you meet and mingle with other Spyder owners. From there, take a guided tour up to Chinook Pass, then along the East and South side of the mountain. Then a fuel stop, and back up the West side of the mountain to return back to Clems for complimentary burgers and hot dogs!

Date: Sunday, August 21, 2011
Time: 8:00 AM
Location: Clems Powersports
408 Roosevelt Avenue
Enumclaw, WA. 98022
(360) 825-4502

Please reply to this thread or call Clems to help give an idea of how many will be attending this beautiful picturesque ride.

murphybrown
07-25-2011, 10:23 AM
At this point I am a definite MAYBE!!

coreyt700
07-27-2011, 03:30 PM
We did this ride last year and had 4 spyders show up. Joe has been doing a great job promoting these events, growing to 12 spyders showing up. Our goal is to have close to 20 Spyders on this Ryde. It will be a family friendly ride and all are welcome!! We hope to keep growing rides like this year over year.

wally69
07-29-2011, 01:31 AM
count me in. Is there going to be hiking this time?

wukka
07-29-2011, 10:17 AM
count me in. Is there going to be hiking this time?
Ha! No hiking this time...unless you insist. :p

chillicpl
08-01-2011, 03:58 PM
We would love to join y'all on this ride but we need a bit of help.

Our plan is to ride Thursday through Sat around the state and meet up w/ you fine Spyder Ryders on Sunday morning. We acknowledge that we have a lack of knowledge of the fine state of Washington w/ the exception of El Nopal restaurant in Sumas and the Bellis Fair Mall. So we're hoping some of you locals can suggest a few places that would be fun rides w/ nice places to stop.

We would welcome any suggestions and if anyone would like to join us that would be cool too!

cheers all and ride safe
Bruce & Rose

Spyder Cat
08-01-2011, 05:42 PM
We're hoping to make that trip . . . but in mid September.
Traveling from Bend to Yakima, then hopefully around Rainer & St Helens.
Maybe we can learn from your ride, best routes, what not to miss, etc.

Heliplt
08-02-2011, 08:42 AM
What is the planed route and schedule, we would like to join in part way through.

guinness
08-02-2011, 11:34 PM
Shoot.... :gaah: I will be at a family reunion that weekend. Sounds like a great ryde... Have fun everyone. Hopefully next time.

wukka
08-03-2011, 11:38 PM
We would love to join y'all on this ride but we need a bit of help.

Our plan is to ride Thursday through Sat around the state and meet up w/ you fine Spyder Ryders on Sunday morning. We acknowledge that we have a lack of knowledge of the fine state of Washington w/ the exception of El Nopal restaurant in Sumas and the Bellis Fair Mall. So we're hoping some of you locals can suggest a few places that would be fun rides w/ nice places to stop.

We would welcome any suggestions and if anyone would like to join us that would be cool too!

cheers all and ride safe
Bruce & Rose

A nice scenic ryde would be Chuckanut Drive (hee-hee) to Highway 9, then Highway 203 through Carnation and Duvall. Then take Highway 18 as you just pass Snoqualmie Falls, staying on 18 until you get to the Highway 164/Muckelshoot exit in Auburn. That will get you to Enumclaw and would be a delightful ryde (albeit a longer one than taking the freeways).

wukka
08-03-2011, 11:44 PM
What is the planed route and schedule, we would like to join in part way through.

All that I know is that we are taking Hwy 410 to Cayuse pass, then taking Hwy 123 along the East side of Rainier. Once we get to Highway 12 near Packwood, our guide is planning to take us on some side roads with a rest stop or two. Then it is back up Hwy 7 and back to Enumclaw...Hope that helps.

Meditron
08-09-2011, 10:47 PM
Hello! I just got my Spyder at the start of the summer and have been having a blast on the thing. I'd like to come down for the ride, weather permitting. I'd be driving down from Seattle that morning if anyone wanted to ride together. :D

Chuck T.
08-16-2011, 01:54 PM
I'll Be There . Did this ride at the first of the year With ABATE It was a Great Ride to bad it rained
count me in. Is there going to be hiking this time?

wukka
08-16-2011, 10:38 PM
I'll Be There . Did this ride at the first of the year With ABATE It was a Great Ride to bad it rained

This is awesome! I've got a feeling we are going to exceed my personal goal of 12 Spyders! And I hope not to jinx it, but the weather forecast is looking N-I-C-E!!!

Riot
08-17-2011, 12:18 AM
Your prob right, I met acouple riders this weekend, 1 just buying/picking up her new RS other already had. They arent members of the forum, but I told em about it. The one that lived local said she would be there. Ran into Chuck T at taco thurs at the yellowbeak acouple weeks ago. thinking ill swing by there again this thurs. Im finally gonna do the DPS recall thurs, told ya id get around to it, just hate fixing **** that aint broke. Wayne ( the nitrous harley ) said hed go again, was on the ghost town ride with us.
Cya Sun, Troy
Oh ya i saw a black RT with passager heading up 212th hill today. didnt know who that was, but if your a member here..i waved, i was on the side of the road fixin my brother in laws dump truck, heh

Chuck T.
08-17-2011, 04:23 PM
Went on my first trip to Forks last weekend with ABATE Friends and confermed I have a very bad situation with tracking. My 2009 spider has just hit 6,500 mi. and ajusted my air pressure in my tires to 18 psi in front and 28 psi in back tire , ajusted my shocks spring pree load to #4 in front and and 6 on the rear . every time i tinker with it i get something different.but still not fixed. I read the forum on this prob. and it seams this is a on going prob. but it's something that can be fixed by just a allignmet but CLEMS tech hasen't even got a jig to even do the job. any Ideas ?:dontknow:

chillicpl
08-17-2011, 11:33 PM
Due to a bad vibration and a backlog at the dealership we won't be able to join you on Sunday. Hopefully next year we'll make it down to do the ride.

cheers and ride safe
Bruce

wukka
08-17-2011, 11:46 PM
Went on my first trip to Forks last weekend with ABATE Friends and confermed I have a very bad situation with tracking. My 2009 spider has just hit 6,500 mi. and ajusted my air pressure in my tires to 18 psi in front and 28 psi in back tire , ajusted my shocks spring pree load to #4 in front and and 6 on the rear . every time i tinker with it i get something different.but still not fixed. I read the forum on this prob. and it seams this is a on going prob. but it's something that can be fixed by just a allignmet but CLEMS tech hasen't even got a jig to even do the job. any Ideas ?:dontknow:

Could be the DPS...Have you had that checked out?
If it was alignment, I would think you would see evidence of tire wear...can you see anthing unusual there?

wukka
08-17-2011, 11:47 PM
Due to a bad vibration and a backlog at the dealership we won't be able to join you on Sunday. Hopefully next year we'll make it down to do the ride.

cheers and ride safe
Bruce
RT or RS?

Riot
08-18-2011, 11:32 PM
Remember how I said I hate fixin shiat that aint broke...well im bout steamin mad atm...had Clems put the DPS unit in for me for the so called safety recall...rode it home, then back to enumclaw for taco thurs. decided to take a long way home, out by lake tapps it goes into LIMP HOME MODE, VSS FAULT, CHECK DPS, so I pull over and shut it off to try and clear codes, that worked, for .6 of a mile, and every .4-3/4 of a mile all the way home to Kent 30+ times. We will see how the phone call goes they are gonna get from me in the morning. but its looking like I wont be able to make the ride sun.
Ride safe,
Troy

guinness
08-21-2011, 01:50 AM
Well because of the family reunion I just went today around the mountain... What a beautiful ryde. Sorry I'll miss everyone!

sealerscot
08-22-2011, 07:47 PM
sorry I missed everone .....did not get spyder back together in time .....got out to Clems @ 9:15 .....

back fender had to go ...and that super hev pipe became a new paper weight

Scot

white rss

coreyt700
08-30-2011, 11:33 AM
Remember how I said I hate fixin shiat that aint broke...well im bout steamin mad atm...had Clems put the DPS unit in for me for the so called safety recall...rode it home, then back to enumclaw for taco thurs. decided to take a long way home, out by lake tapps it goes into LIMP HOME MODE, VSS FAULT, CHECK DPS, so I pull over and shut it off to try and clear codes, that worked, for .6 of a mile, and every .4-3/4 of a mile all the way home to Kent 30+ times. We will see how the phone call goes they are gonna get from me in the morning. but its looking like I wont be able to make the ride sun.
Ride safe,
Troy

Troy,

I just spoke with the guys in the back and they said they figured out the problem and fixed it. Just wondering if they took care of you and made it right by you? If there is anything else I can do just let me know. It sounded like an internal problem with the new DPS that no one could have forseen, but Randy found it and fixed it right?

SPYDERJEFF
08-30-2011, 11:34 AM
Remember how I said I hate fixin shiat that aint broke...well im bout steamin mad atm...had Clems put the DPS unit in for me for the so called safety recall...rode it home, then back to enumclaw for taco thurs. decided to take a long way home, out by lake tapps it goes into LIMP HOME MODE, VSS FAULT, CHECK DPS, so I pull over and shut it off to try and clear codes, that worked, for .6 of a mile, and every .4-3/4 of a mile all the way home to Kent 30+ times. We will see how the phone call goes they are gonna get from me in the morning. but its looking like I wont be able to make the ride sun.
Ride safe,
Troy

Internal defect was found on this new DPS unit. Secure magnet not installed properly from the factory. It had backed out and thus sent imporper readings through out the system causing multiple fault codes. This had been the first such issue we have seen or heard of with these units. Once diagnosed we were able to fix in short order and customer was able to make the ride on Sunday. We now check all new DPS units for this possible condition before install.

coreyt700
08-30-2011, 12:11 PM
Thank you to everyone who showed up and rode. Glad to see you could make it Troy. It was the best ride to date for our shop. I think we had 11 spyders and 32 total riders. We are already planning next years ride. It is tentatively scheduled for the 3rd weekend in August. I will have pics up by this afternoon.

3162131622316233162431625

coreyt700
08-30-2011, 02:00 PM
316263162731628